i have 2 cisco ( 3620 and AS5300) with freeradius 0.5 and accounting work fine.
the config of cisco are. aaa accounting send stop-record authentication failure aaa accounting delay-start aaa accounting update periodic 1 aaa accounting network default start-stop group radius radius-server host 192.168.0.4 auth-port 1645 acct-port 1646 key 7 XXXXXXXXX radius-server retransmit 3 and work fine. whis that this help you. ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, September 18, 2002 5:05 AM Subject: Cisco accounting > I recently installed freeradius 0.7.1 on freebsd4.6 and authentication is > working just fine. But accounting only works on Foundry and not Cisco. I'm > not sure if anyone has experienced this in the pass. Any help is > appreciated. > > Regards > Mathias, > > > DISCLAIMER > This e-mail is intended only for the use of the addressees named above and > may be confidential. If you are not an addressee you must not read it and > must not use any information contained in nor copy it nor inform any person > other than TeleCity Limited or the addressees of its existence or contents. > If you have received this email and are not a named addressee, please delete > it and notify the TeleCity IT department on 0161 226 7643 or by email at > [EMAIL PROTECTED] > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
