Request for another dictionary file?

[Deramus, Chris]

Alan,

Still working on this Default Domain, DNS, and WINS issue. I found an interesting read on Cisco's website that details valid attributes which can be used on a Cisco 3030 series concentrator which is what we have. If you have a second and want to look it over it's at http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/csnt26/usergd26/ap_rads.htm#88844

I will paste the request for a dictionary file below, I believe if I can pass these to the Concentrator it will know what to do with them:

Attribute	Value	Type of Value
CVPN3000-Access-Hours	1	string
CVPN3000-Simultaneous-Logins	2	integer
CVPN3000-Primary-DNS	5	ipaddr
CVPN3000-Secondary-DNS	6	ipaddr
CVPN3000-Primary-WINS	7	ipaddr
CVPN3000-Secondary-WINS	8	ipaddr
CVPN3000-SEP-Card-Assignment	9	integer
CVPN3000-Tunneling-Protocols	11	integer
CVPN3000-IPSec-Sec-Association	12	string
CVPN3000-IPSec-Authentication	13	integer
CVPN3000-IPSec-Banner1	15	string
CVPN3000-IPSec-Allow-Passwd-Store	16	integer
CVPN3000-Use-Client-Address	17	integer
CVPN3000-IPSec-Split-Tunnel-List	27	string
CVPN3000-IPSec-Default-Domain	28	string
CVPN3000-IPSec-Tunnel-Type	30	integer
CVPN3000-IPSec-Mode-Config	31	integer
CVPN3000-IPSec-User-Group-Lock	33	integer
CVPN3000-IPSec-Through-NAT	34	integer
CVPN3000-IPSec-Through-NAT-Port	35	integer

 

 

This seems to have exactly what I'm looking for, I can't seem to locate anything else. If it's possible to either a.) add this to the current dictionary.cisco file or b.) make an entirely new dictionary file that's supported please let me know.

 

Thanks,

 

Chris