Nope I had all that set like that. I am using an ascend 6000 max.
Below is the snippet from my admin.conf file for that section.
But it still wont show logged on users. it was working at one time.
Any other suggestions on where to look.. I am really stumped I went though
just about every file.
general_finger_type:
#general_snmpfinger_bin: %{general_base_dir}/bin/snmpfinger
general_radclient_bin: %{general_radiusd_base_dir}/bin/radclient
#
----- Original Message -----
From: "Kostas Kalevras" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, September 21, 2002 11:06 AM
Subject: Re: radwtmp
> On Sat, 21 Sep 2002, Nick Marino wrote:
>
> > ahhh thanks.. that helps alot. the radutmp is being created, and the
info is
> > in the radacct table like it is supposed to as I can look at accounting
and
> > that shows the connection there and I can click on the users name and it
> > will show me the info and that they are currently connected and even
shows
> > how long they have been on in realtime, but the online users function
> > displays nothing.
>
> Check conf/admin.conf and especially the comments about
general_finger_type.
> Make sure that bin/snmpfinger uses the correct snmpwalk command and that
it
> returns the correct results (snmfinger works on cisco access servers). Try
> commenting out general_finger_type so that the Online Users page will just
> query the radacct table and not try to do a finger on the NAS.
>
>
> --
> Kostas Kalevras Network Operations Center
> [EMAIL PROTECTED] National Technical University of Athens, Greece
> Work Phone: +30 10 7721861
> 'Go back to the shadow' Gandalf
>
>
> -
> List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
