Hi, all!
Now its seems to work, i take openssl-0.9.7beta2 and i configure that sharedmode (and
i make some changes tls Makefile, i change opensll path and libs). Everything goes
just fine, freeradius dont crash anymore, but i have some other problems. It gives
rlm_eap: Unsupported EAP_TYPE 3, when i try to authenticate. Here is some log:
----------
rad_recv: Access-Request packet from host 194.100.181.250:1026, id=27,
length=213
Framed-MTU = 1480
NAS-IP-Address = 194.100.181.250
NAS-Identifier = "EAP_SW"
User-Name = "demo"
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 1
NAS-Port-Type = Ethernet
NAS-Port-Id = "1"
Called-Station-Id = "00-01-e7-b7-29-e1"
Calling-Station-Id = "00-01-03-66-7f-19"
Connect-Info = "CONNECT Ethernet 100Mbps Full duplex"
State =
0x85b985c00847873f0bc0aa19e8058cb3d1dcab3defe97f622b3066cdae9a061fa2510059
EAP-Message = "\002\003\000\006\003\004"
Message-Authenticator = 0xf5f8be56aecefced5cce3f9f7c6e77a9
modcall: entering group authorize
modcall[authorize]: module "preprocess" returns ok
modcall[authorize]: module "eap" returns updated
rlm_realm: Looking up realm NULL for User-Name = "demo"
rlm_realm: No such realm NULL
modcall[authorize]: module "suffix" returns noop
users: Matched demo at 139
modcall[authorize]: module "files" returns ok
modcall: group authorize returns updated
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
modcall: entering group authenticate
rlm_eap: Request found, released from the list
rlm_eap: Unsupported EAP_TYPE 3
modcall[authenticate]: module "eap" returns invalid
modcall: group authenticate returns invalid
auth: Failed to validate the user.
Delaying request 1 for 1 seconds
Finished request 1
---------
Regards,
Ville Leinonen
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
