Hi,
Yep.. I have both of the sql queries for simul use uncommented .. below is
my radiusd -X output .. (checkrad is in /usr/local/sbin and executable by
everybody), also my NAS's are set up in clients.conf .. and below the
radiusd -X output is the output created when a user has 0 stoptime in the
db, but is not actually online .. (stale session) .. I also have debug in
checkrad turned on, but nothing is showing up ..
debian:~/freeradius# radiusd -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/raddb/clients.conf
Config: including file: /etc/raddb/sql.conf
main: prefix = "/usr/local"
main: localstatedir = "/var"
main: logdir = "/var/log/radius"
main: libdir = "/usr/local/lib"
main: radacctdir = "/var/log/radius/radacct"
main: hostname_lookups = no
read_config_files: reading dictionary
read_config_files: reading clients
read_config_files: reading realms
read_config_files: reading naslist
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_auth = no
main: log_auth_badpass = yes
main: log_auth_goodpass = no
main: pidfile = "/var/run/radiusd/radiusd.pid"
main: user = "nobody"
main: group = "nogroup"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "yes"
main: nospace_pass = "yes"
main: proxy_requests = no
security: max_attributes = 200
security: reject_delay = 1
main: debug_level = 0
read_config_files: entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded preprocess
preprocess: huntgroups = "/etc/raddb/huntgroups"
preprocess: hints = "/etc/raddb/hints"
preprocess: with_ascend_hack = yes
preprocess: ascend_channels_per_line = 30
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded SQL
sql: driver = "rlm_sql_mysql"
sql: server = "localhost"
sql: port = ""
sql: login = "root"
sql: password = ""
sql: radius_db = "radius"
sql: acct_table = "radacct"
sql: acct_table2 = "radacct"
sql: authcheck_table = "radcheck"
sql: authreply_table = "radreply"
sql: groupcheck_table = "radgroupcheck"
sql: groupreply_table = "radgroupreply"
sql: usergroup_table = "usergroup"
sql: nas_table = "nas"
sql: dict_table = "dictionary"
sql: sqltrace = no
sql: sqltracefile = "/var/log/radius/sqltrace.sql"
sql: deletestalesessions = yes
sql: num_sql_socks = 5
sql: sql_user_name = "%{User-Name}"
sql: authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM
radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id"
sql: authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM
radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id"
sql: authorize_group_check_query = "SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = '%{SQL-User-Name}'
AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id"
sql: authorize_group_reply_query = "SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = '%{SQL-User-Name}'
AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id"
sql: authenticate_query = "SELECT Value,Attribute FROM radcheck WHERE
UserName = '%{User-Name}' AND ( Attribute = 'User-Password' OR Attribute =
'Password' OR Attribute = 'Crypt-Password' ) ORDER BY Attribute DESC"
sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S',
AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime),
AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay =
%{Acct-Delay-Time} WHERE AcctSessionTime=0 AND AcctStopTime=0 AND
NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
sql: accounting_update_query = "UPDATE radacct SET FramedIPAddress =
'%{Framed-IP-Address}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND
UserName = '%{SQL-User-Name}' AND NASIPAddress= '%{NAS-IP-Address}' AND
AcctStopTime = 0"
sql: accounting_start_query = "INSERT into radacct (RadAcctId,
AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId,
NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets,
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType,
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('',
'%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S',
'0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')"
sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime =
'%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start =
'%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName =
'%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime = 0"
sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S',
AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets =
'%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}',
AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE
AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND
NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime = 0"
sql: accounting_stop_query_alt = "INSERT into radacct (RadAcctId,
AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId,
NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets,
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType,
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('',
'%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '0',
'%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}',
'%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"
sql: connect_failure_retry_delay = 60
sql: simul_count_query = "SELECT COUNT(*) FROM radacct WHERE
UserName='%{SQL-User-Name}' AND AcctStopTime = 0"
sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName,
NASIPAddress, NASPortId, FramedIPAddress, CalledStationId FROM radacct
WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0"
sql: simul_zap_query = "DELETE FROM radacct WHERE RadAcctId = '%s'"
rlm_sql: Driver rlm_sql_mysql loaded and linked
rlm_sql: Attempting to connect to root@localhost:/radius
rlm_sql: starting 0
rlm_sql: Attempting to connect #0
rlm_sql: Starting connect to MySQL server for #0
rlm_sql: Connected new DB handle, #0
rlm_sql: starting 1
rlm_sql: Attempting to connect #1
rlm_sql: Starting connect to MySQL server for #1
rlm_sql: Connected new DB handle, #1
rlm_sql: starting 2
rlm_sql: Attempting to connect #2
rlm_sql: Starting connect to MySQL server for #2
rlm_sql: Connected new DB handle, #2
rlm_sql: starting 3
rlm_sql: Attempting to connect #3
rlm_sql: Starting connect to MySQL server for #3
rlm_sql: Connected new DB handle, #3
rlm_sql: starting 4
rlm_sql: Attempting to connect #4
rlm_sql: Starting connect to MySQL server for #4
rlm_sql: Connected new DB handle, #4
Module: Instantiated sql (sql)
Module: Loaded detail
detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on IP address *, ports 1812/udp and 1813/udp.
Ready to process requests.
rad_recv: Access-Request packet from host 203.30.170.200:3258, id=19, length=58
User-Name = "malton"
User-Password = ")m\341\tf\275\223\343\377\034ly:{\020\207"
NAS-Port = 12
NAS-IP-Address = 203.30.170.200
modcall: entering group authorize
modcall[authorize]: module "preprocess" returns ok
radius_xlat: 'malton'
sql_set_user: escaped user --> 'malton'
radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE
Username = 'malton' ORDER BY id'
rlm_sql: Reserving sql socket id: 4
radius_xlat: 'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = 'malton' AND
usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radreply WHERE
Username = 'malton' ORDER BY id'
radius_xlat: 'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = 'malton' AND
usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
radius_xlat: 'SELECT Value,Attribute FROM radcheck WHERE UserName =
'malton' AND ( Attribute = 'User-Password' OR Attribute = 'Password' OR
Attribute = 'Crypt-Password' ) ORDER BY Attribute DESC'
rlm_sql: Released sql socket id: 4
modcall[authorize]: module "sql" returns ok
modcall: group authorize returns ok
auth: type Crypt
modcall: entering group session
rlm_sql: Reserving sql socket id: 3
radius_xlat: 'malton'
sql_set_user: escaped user --> 'malton'
radius_xlat: 'SELECT COUNT(*) FROM radacct WHERE UserName='malton' AND
AcctStopTime = 0'
radius_xlat: 'SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress,
NASPortId, FramedIPAddress, CalledStationId FROM radacct WHERE
UserName='malton' AND AcctStopTime = 0'
rlm_sql: Released sql socket id: 3
modcall[session]: module "sql" returns ok
modcall: group session returns ok
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 19 to 203.30.170.200:3258
Reply-Message = "\r\nYou are already logged in - access denied\r\n\n"
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 19 with timestamp 3dabf01a
Nothing to do. Sleeping until we see a request.
At 11:06 14/10/2002 +0300, you wrote:
>On Mon, 14 Oct 2002, Tim wrote:
>
> > Yep .. I have
> > -------------------------------------------------
> > | GroupName | Attribute - | Value | Op |
> > -------------------------------------------------
> > | dialup | Simultaneous-Use | 1 | := |
> > -------------------------------------------------
> >
> > in my radgroupcheck MySQL db ..
>
>Both simul_count_query and simul_verify_query should be uncommented in
>sql.conf.
>Run the server in debug mode (radiusd -X) and check the output.
>Do you have checkrad in the default location? The server will not honor the
>checkrad option of radiusd.conf for the moment.
>
>--
>Kostas Kalevras Network Operations Center
>[EMAIL PROTECTED] National Technical University of Athens, Greece
>Work Phone: +30 210 7721861
>'Go back to the shadow' Gandalf
>
>
>-
>List info/subscribe/unsubscribe? See
>http://www.freeradius.org/list/users.html
Tim Fraser
*********************************************************
Relax Internet
Internet Service Provider (dial-up & ADSL) / Web Hosting
www.relax.com.au
*********************************************************
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
