Summary:
My dialout isn't seizing or dialing out. MAX is set to VSA, not OLD. With
briDisplay I'm not seeing any attempt to dial. This leads me to conclude
that I'm not returning some special nugget that will encourage it to dial.
Detail:
The routes are loaded fine and if I go after the remote address, the MAX1800
pulls the profile from radius (once for each ping packet) and gets the
radiusd -X output noted just below. Radiusd is 0.7.1; an inbound call works
really swell; MAX1800 is running 7.2.4:
auth: type Local
auth: user supplied User-Password matches local User-Password
Sending Access-Accept of id 133 to 192.168.0.4:1025
Password = "ascend"
Ascend-Authen-Alias = "boohoo"
User-Name = "boo-00"
User-Service-Type = Outbound-User
Framed-Address = 192.168.0.41
Framed-Netmask = 255.255.255.248
Framed-Protocol = MPP
Ascend-Idle-Limit = 0
Ascend-Dial-Number = "95310740"
Framed-Routing = None
Framed-Route = "192.168.0.41/29 192.168.0.41 1"
Ascend-Send-Auth = Send-Auth-CHAP
Ascend-Send-Secret = "1\267\255@\021\r*\303\233\2712N0E|\366"
Ascend-Base-Channel-Count = 1
Ascend-Minimum-Channels = 1
Ascend-Maximum-Channels = 2
Finished request 8
RadIf reports:
RADIF: Authentication Ack
RADIF: vendor 0 attr 2, len 8, 61 73 63 65
RADIF: vendor 529 attr 203, len 6, 62 6f 6f 68
RADIF: vendor 0 attr 1, len 8, 62 62 62 2d
RADIF: vendor 0 attr 6, len 6, 00 00 00 05
RADIF: vendor 0 attr 8, len 6, c0 a2 00 29
RADIF: vendor 0 attr 9, len 6, ff ff ff f8
RADIF: vendor 0 attr 7, len 6, 00 00 01 00
RADIF: vendor 529 attr 244, len 6, 00 00 00 00
RADIF: vendor 529 attr 227, len 10, 39 35 33 31
RADIF: vendor 0 attr 10, len 6, 00 00 00 00
RADIF: vendor 0 attr 22, len 36, c0 a2 00 2e
RADIF: raw route B05092C0, cooked route B0567DD0
RADIF: processing framed route "192.168.0.40/29 192.168.0.41 1"
RADIF: ip address 192.168.0.40, netmask 255.255.255.248
RADIF: gateway address 192.168.0.41
RADIF: metric 1
RADIF: Adding cooked route B0567DC0 to list
RADIF: vendor 529 attr 231, len 6, 00 00 00 02
RADIF: vendor 529 attr 214, len 18, c2 12 ca 36
RADIF: Decoded secret is 'umpgpes:5'
RADIF: vendor 529 attr 172, len 6, 00 00 00 01
RADIF: vendor 529 attr 173, len 6, 00 00 00 01
RADIF: vendor 529 attr 235, len 6, 00 00 00 02
RADIF:_freeInfoClassSess
Which is generated from:
mysql> select UserName,Attribute,Value from radreply where UserName =
'boo-00-out' order by id;
-----------+---------------------------+------------------------------------
UserName | Attribute | Value
-----------+---------------------------+------------------------------------
boo-00-out | Auth-Type | Local
boo-00-out | Password | ascend
boo-00-out | Ascend-Authen-Alias | boku
boo-00-out | User-Name | boo-00
boo-00-out | User-Service-Type | Dialout-Framed-User
boo-00-out | Framed-Address | 192.168.0.41
boo-00-out | Framed-Netmask | 255.255.255.248
boo-00-out | Framed-Protocol | MPP
boo-00-out | Ascend-Idle-Limit | 0
boo-00-out | Ascend-Dial-Number | 95310740
boo-00-out | Framed-Routing | None
boo-00-out | Framed-Route | 192.168.0.40/29 192.168.0.41 1
boo-00-out | Ascend-Send-Auth | Send-Auth-CHAP
boo-00-out | Ascend-Send-Secret | umpgpes:5
boo-00-out | Ascend-Base-Channel-Count | 1
boo-00-out | Ascend-Minimum-Channels | 1
boo-00-out | Ascend-Maximum-Channels | 2
-----------+---------------------------+------------------------------------
17 rows in set (0.01 sec)
Many thanks...
peter
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
