Ok,
The idea is that a user dials to the MAX TNT, hi is authenticated
by his CLID and immediatelly disconnected. The some seconds later
MAX TNT will callback the user.
Now I've made the callback profile, here is an example:
02100800 User-Password == "Ascend-CLID"
Service-Type = Callback-Framed-User,
Framed-Routing = None,
Ascend-Data-Svc = Switched-modem,
Ascend-Dial-Number = "02100800209",
Ascend-Send-Auth = Send-Auth-None,
Ascend-Callback = Callback-Yes,
Ascend-Callback-Delay = 30,
Ascend-CBCP-Enable = CBCP-Enabled,
Ascend-CBCP-Mode = CBCP-Profile-Callback,
Ascend-Dialout-Allowed = Dialout-Allowed,
Ascend-Assign-IP-Pool = 0,
Ascend-Idle-Limit = 1200
The callback feature acctually works, but there's one minor
anoyance: when the MAX disconnects, so to callback, the user
receives an automated voice message from the telco "the phone
line is temporarily off".
I guess the problem may very likely be on the telco's side, but I want
to be check every possibility to solve the issue at my side.
Either in the Radius profile or on the MAX TNT.
Does anyone have some hints where to look?
--
Damjan Georgievski
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
