this isn't a cisco list, but I'll answer anyway. you don't need to assign a netmask. you just assign the first and last IPs. ppp will assign a /32 netmask by itself.
http://www.cisco.com/en/US/products/hw/univgate/ps501/products_case_study_chapter09186a008007c6a5.html as5300 is the same as an as5200 as far as commands go. On Sat, 2002-11-23 at 11:55, Marcin Groszek wrote: > I am setting up my first as5200 and i am having really hard time with > it. > One problem is, the subnet mask assign to dial-up users is 255.0.0.0 and > i have no idea how to change it to 255.255.255.0 > I am using ip local pool not dhcp server , the ip is getting assign from > local pool but the mask is 255.0.0.0. > I have try to setup user file to test user with static ip address and > mask 255.255.255.0 but AS still assign ip from local pool. > The authentication is working, i get "on line" but because mask i am not > able to route. > Any help will do. > > > -- > Best Regards: Marcin Groszek > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > -- Regards, Jason A. Lixfeld Fastvibe Corporation Senior IP Network Engineer 220-156 Front St. W [EMAIL PROTECTED] Toronto, ON M5V-2L6 ------------------------------------------------------------- tel://416.341.0099:223 fax://416.341.0088 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
