Hello,
we use an cisco 3005 and since yesterday version 0.8 of radius. But now we
have a problem :
after authentification the client (w2k)immediately lost connection. on
radius log everything
seems ok :
rad_recv: Accounting-Request packet from host 162.9.200.251:1305, id=144,
length=119
User-Name = "hartmut.fischer"
NAS-Port = 1618
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-IP-Address = 10.163.242.1
Class = 0x00
Acct-Status-Type = Start
Acct-Session-Id = "80200149"
Tunnel-Client-Endpoint:0 = "149.225.2.151"
Acct-Authentic = RADIUS
Acct-Delay-Time = 0
NAS-IP-Address = 162.9.200.251
NAS-Port-Type = Virtual
modcall: entering group preacct
rlm_realm: No '@' in User-Name = "hartmut.fischer", looking up realm
NULL
rlm_realm: No such realm NULL
modcall[preacct]: module "suffix" returns noop
modcall[preacct]: module "files" returns noop
modcall[preacct]: module "preprocess" returns noop
modcall: group preacct returns noop
modcall: entering group accounting
radius_xlat: '/usr/local/var/log/radius/radacct/162.9.200.251/detail'
rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail
expands to /usr/local/var/log/radius/radacct/162.9.200.251/detail
modcall[accounting]: module "detail" returns ok
modcall: group accounting returns ok
Sending Accounting-Response of id 144 to 162.9.200.251:1305
Finished request 52
Going to the next request
--- Walking the entire request list ---
Cleaning up request 52 ID 144 with timestamp 3dec72a7
Waking up in 2 seconds...
--- Walking the entire request list ---
Cleaning up request 51 ID 80 with timestamp 3dec72a3
Nothing to do. Sleeping until we see a request.
rad_recv: Accounting-Request packet from host 162.9.200.251:1305, id=145,
length=155
User-Name = "hartmut.fischer"
NAS-Port = 1618
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-IP-Address = 10.163.242.1
Class = 0x00
Acct-Status-Type = Stop
Acct-Input-Octets = 1030
Acct-Output-Octets = 10507
Acct-Session-Id = "80200149"
Acct-Session-Time = 2
Acct-Input-Packets = 10
Acct-Output-Packets = 8
Acct-Terminate-Cause = User-Request
Tunnel-Client-Endpoint:0 = "149.225.2.151"
Acct-Authentic = RADIUS
Acct-Delay-Time = 0
NAS-IP-Address = 162.9.200.251
NAS-Port-Type = Virtual
modcall: entering group preacct
rlm_realm: No '@' in User-Name = "hartmut.fischer", looking up realm
NULL
rlm_realm: No such realm NULL
modcall[preacct]: module "suffix" returns noop
modcall[preacct]: module "files" returns noop
modcall[preacct]: module "preprocess" returns noop
modcall: group preacct returns noop
modcall: entering group accounting
radius_xlat: '/usr/local/var/log/radius/radacct/162.9.200.251/detail'
rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail
expands to /usr/local/var/log/radius/radacct/162.9.200.251/detail
modcall[accounting]: module "detail" returns ok
modcall: group accounting returns ok
Sending Accounting-Response of id 145 to 162.9.200.251:1305
Finished request 53
Going to the next request
user Entry :
hartmut.fischer Auth-Type := Local, User-Password == "********"
Service-Type = Framed-User,
Framed-IP-Address = 255.255.255.255,
Framed-Routing = Broadcast-Listen,
Framed-MTU = 1500,
Framed-Compression = Van-Jacobsen-TCP-IP,
what has changed form version 0.4 to 0.8 ?
with the same configuration on radius 0.4 all works fine.
br uli
-------------------------------------------
Ulrich Hofacker
ATMEL Germany GmbH
IT Operations
Theresienstrasse 2
74072 Heilbronn
Germany
Tel +49-7131-672916
Mobile +49-172-7415179
Fax +49-7131-672210
e-mail: [EMAIL PROTECTED]
www: http://www.atmel.de
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
