When authentication occurs when dialing through a Cisco Router, and the
Framed-IP-Address is assigned, the client (Windows XP)is rejecting the
connection if it has been set for a static IP address. Is there away to
allow static IP addresses to connect while there account is still set
with a Framed-IP-Address, so they could use a Static IP address or an IP
address assigned from the radius.
Here is my current configuration Running on Freeradius 0.7.1.
agrimmett NAS-IP-Address == 192.168.2.175, Auth-Type := System
Framed-Protocol = PPP,
Framed-IP-Address := 192.168.40.126,
Ascend-Client-Primary-DNS = 192.168.4.52,
Ascend-Client-Secondary-DNS = 192.168.50.52,
Framed-Compression = Van-Jacobson-TCP-IP,
Idle-Timeout = 0,
Framed-MTU = 1500,
Fall-Through = Yes
I noticed also in Release 0.8's change log that it now has a post_auth
section, how do you define that, or where can I locate a doc/example of
the configuration.
Thanks
Andrew Grimmett
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
