On Sun, 8 Dec 2002, Oliver Zimmermann wrote:
> I have the problem understanding how the counter module works. Lets say I want to
>provide a Maximum Daily Session linit of 3600 seconds for a user on freeradius-0.7.
>Is the following scenario right? (sorry I can't test it for the moment):
>
> users file:
> ----------
> DEFAULT Max-Daily-Session = 3600
> Fall-Through = 1
>
> John_D Password = "FZ768wRll", NAS-IP-Address = "214.32.39.2", Simultaneous-Use =
>1
> Service-Type = Framed-User,
> Framed-Protocol = PPP,
> Framed-IP-Address = 255.255.255.254,
> Framed-MTU = 1500,
> Idle-Timeout = 3600,
> Port-Limit = 1
> ...
> _________
>
> radiusd.conf:
> ____________
> ...
> counter {
> filename = ${raddbdir}/db.counter
> key = User-Name
> count-attribute = Acct-Session-Time
> reset = daily
> counter-name = Daily-Session-Time
> check-name = Max-Daily-Session
> allowed-servicetype = Framed-User
> cache-size = 5000
> }
> authorize {
> counter
> suffix
> files
The counter module should come *after* the files module so that
Max-Daily-Session has been set when it runs.
Also add the counter module in the instantiate section.
> }
> accounting {
> detail
> counter
> unix
> radutmp
> }
> session {
> radutmp
> }
> ---------------
>
> If someone knows how to realize the same with "Daily-Session-Time" is appreciated too
>
> Thank you
> Oliver
>
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
--
Kostas Kalevras Network Operations Center
[EMAIL PROTECTED] National Technical University of Athens, Greece
Work Phone: +30 210 7721861
'Go back to the shadow' Gandalf
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
