I've downloaded freeradius0.8.1 and installed it on a
FreeBSD 4.4 pc.
I added the following lines in the config file "hints"
DEFAULT Suffix = "@test1.vpdn", Strip-User-Name = No
Hint = "PPP",
Service-Type = Framed-User,
Framed-Protocol = PPP,
cisco-avpair = "lcp:interface-config=ip vrf
forwarding vrf1\\n ip unnumbered loopback1\\n peer
default ip address pool vpn1"
# the last line is a set of command for the cisco
router as NAS
lines in proxy.conf
realm test1.vpdn {
type = radius
authhost = 211.xx.xx.93:1812
accthost = 211.xx.xx.93:1813
secret = WinRadius
}
# i dont want the radius server 211.xx.xx.93 to return
any attribtes about NAS because it belongs to our
customer.
now, the result is:
the customer's radius server successfully
authenticated the request from freeradius server, but
i lose the attributes added in the file "hints".
can i do anything to override the customer's radius's
returned attributes?
thank you all.
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
