I looked into this solution (using DHCP as the ip address manager for RADIUS clients) but in the end hooking in the dhcpclient code to work with freeradius seemed like a lot of work, and an incomplete solution (for our specific needs). So we ended up just writing our own IP address management stuff; it was pretty straightforward.
I am using Linux, I dunno what platform you are developing on. MV On Tue, 2003-01-14 at 08:11, [EMAIL PROTECTED] wrote: > Hi everyone, > > My problem concern how to assign the IP address to a client after the radius server >(Freeradius) performed md5 authentication. Maybe it's necessary to install a DHCP >server too? If yes which is the right way to configure Freeradius to interact with >DHCP server ? > > Thanks very much > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Mike Varley -= SOMA Networks =- Tel: 416.977.1414 x1578 email: [EMAIL PROTECTED] - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
