That's true, and that's why I have included the MAC address of the Access
Point and the Wireless PC Card both in the "users" file like this:
#Access Point 3152C
00022d-191cb3 Auth-Type = Local, User-Password == "testing123"
Service-Type = Framed-User,
#PC Card Orinoco Gold (Test Laptop)
00022d-677c37 Auth-Type = Local, User-Password == "testing123"
Service-Type = Framed-User,
On Fri, 31 Jan 2003, Evren Yurtesen wrote:
> well it is sending mac address as username,
> you should perhaps set the usernames in users file as mac addresses.
> what do you have in users file now?
>
> Evren
>
> On Thu, 30 Jan 2003, Shahid M. Bhatti wrote:
>
> > Hi,
> > I'm trying to authenticate Wireless Access Point of
> > Orinoco/Lucent/Avaya/Agere/Proxim with Free Radius server. I've made the
> > user as AP's MAC address in /etc/raddb/users file and conf file, but when
> > I start the radius server in debig mode I get the following messages which
> > I have attached below. Please have a look at it and help me in figuring
> > out what should I do? Thanks a bunch.
> >
> > -Shahid
> >
> > Listening on IP address *, ports 1812/udp and 1813/udp, with proxy on
> > 1814/udp.
> > Ready to process requests.
> > rad_recv: Access-Request packet from host 128.111.20.96:192, id=1,
> > length=59
> > NAS-IP-Address = 128.111.20.96
> > User-Name = "00022d-677c37"
> > User-Password = "testing123"
> > modcall: entering group authorize
> > modcall[authorize]: module "preprocess" returns ok
> > rlm_chap: Could not find proper Chap-Password attribute in request
> > modcall[authorize]: module "chap" returns noop
> > modcall[authorize]: module "mschap" returns notfound
> > rlm_realm: No '@' in User-Name = "00022d-677c37", looking up realm
> > NULL
> > rlm_realm: No such realm NULL
> > modcall[authorize]: module "suffix" returns noop
> > users: Matched DEFAULT at 162
> > modcall[authorize]: module "files" returns ok
> > modcall: group authorize returns ok
> > rad_check_password: Found Auth-Type System
> > auth: type "System"
> > modcall: entering group authenticate
> > modcall[authenticate]: module "unix" returns notfound
> > modcall: group authenticate returns notfound
> > auth: Failed to validate the user.
> > Delaying request 0 for 1 seconds
> > Finished request 0
> > Going to the next request
> > --- Walking the entire request list ---
> > Waking up in 1 seconds...
> > rad_recv: Access-Request packet from host 128.111.20.96:192, id=1,
> > length=59
> > Sending Access-Reject of id 1 to 128.111.20.96:192
> > --- Walking the entire request list ---
> > Waking up in 5 seconds...
> > --- Walking the entire request list ---
> > Cleaning up request 0 ID 1 with timestamp 3e39a2f4
> > Nothing to do. Sleeping until we see a request.
> >
> >
> >
> > -
> > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
> >
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
