Nadeem, Also, make sure that the firmware on your client cards is version 4.25 or later and the firmware on you AP is version 11.06 or later. This will ensure that Draft 10 of the 802.1x protocol can be used by both the client and AP.
Cheers, Philip Blow Senior Technical Manager Simply Wireless [EMAIL PROTECTED] -----Original Message----- From: Nadeem Akhtar [mailto:[EMAIL PROTECTED]] Sent: Thursday, 13 February 2003 6:38 AM To: [EMAIL PROTECTED] Subject: EAP + Windows2000 Hi, I'm trying to set up eap-tls based authentication between a wireless client (Windows 2000) and a Cisco Aironet 350 AP. I've installed certificates in the client and a RADIUS server is also up and running. The problem is that the client is not authenticated. I used Ethereal to capture packets on the client wireless interface and I can see the 'Request, identity' EAP packet from the AP but there is no response from the client! Can anyone tell me how to debug this problem or any other leads on this. Regards, Nadeem Nadeem Akhtar Centre for Comm. Systems Research University of Surrey Guildford, Surrey GU2 7XH United Kingdom Tel (CCSR) : 01483-683605 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
