Can someone out there who has gotten Cisco's LEAP to work with
Freeradius give me some pointers? I'm not exactly sure what modules I
need to use. Right now I have the following authorize modules
preprocess
chap
mschap
eap
suffic
files
I've configured my wireless NIC using Cisco's ACU utility for Linux.
When I set a username/password I see the following on my freeradius
server.
rad_recv: Access-Request packet from host 10.252.238.3:1028, id=3,
length=144
User-Name = "shickey"
Cisco-AVPair = "ssid=testing123"
NAS-IP-Address = 10.252.238.3
Called-Station-Id = "000b46e2e6f0"
Calling-Station-Id = "00078592c49f"
NAS-Identifier = "wkstn3"
NAS-Port = 37
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
EAP-Message = "\002\002\000\014\001shickey"
Message-Authenticator = 0xce7bf3402e987718de6daae59822ccda
rlm_chap: Could not find proper Chap-Password attribute in request
rlm_unix: Attribute "User-Password" is required for authentication.
Sending Access-Reject of id 3 to 10.252.238.3:1028
I tinkered around with the "802.1X Protocol Version (for EAP
Authentication):" setting in the Cisco 1200 AP gui, but only Draft 10
seems to get me anywhere.
Anyway, I cringe to post this because I'm sure this is a stupid
question, but I've been unable to find a solution.
--
Shane Hickey : Network/System Consultant
GPG KeyID: 777CBF3F
Key fingerprint: 254F B2AC 9939 C715 278C DA95 4109 9F69 777C BF3F
Listening to: Echo & The Bunnymen - Friction [live]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
