Hello Joe, thank you. I forgot to look in this man page.
It works great and I save a lot of time Christian Ihm -----Urspr�ngliche Nachricht----- Von: Joe Maimon [mailto:[EMAIL PROTECTED] Gesendet: Mittwoch, 26. Februar 2003 14:32 An: [EMAIL PROTECTED] Betreff: Re: more than one Cisco-AVPair attributes try using += man 5 users Ihm, Christian wrote: > Hello, > > > > I'm testing Freeradius about 4 weeks. I want to implement this product > in our firm. > > > > I want to create a user who could make an Dial-In to an Cisco Router > 3640 who correspond to an Radius-Server. > > > > I create following config: > > > > * Ritchie Auth-Type := Local, Password == ritch * > > * Service-Type = Framed-User, * > > * Framed-Protocol = PPP, * > > * Cisco-AVPair:="ip_addr-pool=Test", * > > * Framed-IP-Netmask = 255.255.255.0, * > > * Framed-Routing = Broadcast-Listen, * > > * Framed-MTU = 1500, * > > * Cisco-AVPair:="ip:dns-servers= > xxx.xxx.xxx.xxx", * > > * > Cisco-AVPair:="ip:wins-servers=xxx.xxx.xxx.xxx", * > > * Framed-Compression = Van-Jacobsen-TCP-IP * > > * * > > I'm running the Radiusd-Daemon in Debug mode -X . When this user dials > in the radiusd cleans the string of the address-pool and wrights the > wins-serves in > > this string too . So the client don't get an ip-address an quit. > > > > Has anyone an idea what the problem is. > > > > It would be very helpfull fo me. > > > > Thanks a lot > > > > Christian Ihm > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
