You must use for each syntax from Ciasco-AVPairs an += Now the Cisco will notifiy each attribute
Mit freundlichen Gr�ssen Christian Ihm -----Urspr�ngliche Nachricht----- Von: Blinov A. Sergey [mailto:[EMAIL PROTECTED] Gesendet: Montag, 17. M�rz 2003 12:50 An: [EMAIL PROTECTED] Betreff: VSA: What's I'm doing wrong.. I wan't to use VSA pair in my config.. doing /etc/raddb/users nording Auth-Type := Local, User-Password := "123" Service-Type = Framed-User, Framed-Protocol = PPP, Framed-IP-Address = 255.255.255.254, Cisco-AVPair = "lcp:callback-rotary=1", Cisco-AVPair = "ip:addr-pool=SANDY1", Cisco-AVPair = "lcp:callback-dialstring=12345", Fall-Through = Yes DEFAULT Auth-Type := Local Cisco-AVPair = "ip:addr-pool=SANDY2" What the radius debug message... rad_recv: Access-Request packet from host xxx.xx.xxx.xx:33875, id=66, length=65 User-Name = "nording" User-Password = "123" NAS-IP-Address = 255.255.255.255 NAS-Port = 2 Framed-Protocol = PPP modcall: entering group authorize users: Matched nording at 107 users: Matched DEFAULT at 116 modcall[authorize]: module "files" returns ok modcall[authorize]: module "mschap" returns noop modcall: group authorize returns ok rad_check_password: Found Auth-Type Local auth: type Local auth: user supplied User-Password matches local User-Password Sending Access-Accept of id 66 to xxx.xx.xxx.xx:33875 Service-Type = Framed-User Framed-Protocol = PPP Framed-IP-Address = 255.255.255.254 Cisco-AVPair = "lcp:callback-rotary=1" Finished request 0 What I'm doing wrong... Thanks.. -- Blinov A. Sergey, POST Ltd. system administrator Phone: +7 8652 972729, +7 8793 467937 Email: [EMAIL PROTECTED] Information: BLNY-RIPN, BLNY-RIPE - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
