Has someone configured a CISCO 3600 in order to send router advertisement through a virtual-access cloned from virtual-template through a RADIUS server?
You will see , my radius server is freeradius and I have an user as it is following written :
rafa Auth-Type := Local, User-Password == "wilma"
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-MTU = 1480,
cisco-avpair += "ipv6:prefix=3ffe:ffff:1::/64 onlink autoconfig",
cisco-avpair += "ipv6:route#1=3ffe:ffff:1::/64"However, router cisco sends router advertisements without prefix instead of 3ffe:ffff:1::/64
My virtual-template is
interface Virtual-Template1 no ip address ipv6 enable ipv6 mtu 1480 no ipv6 nd suppress-ra ppp authentication chap !
Could you help me?
Thank very much....
-- ------------------------------------------------------ Rafael Marin Lopez Faculty of Computer Science-University of Murcia 30071 Murcia - Spain Telf: +34968364644 e-mail: [EMAIL PROTECTED] ------------------------------------------------------
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
