I found with my HP switch, I needed to change the type of the Tunnel-Private-Group-ID to String in the dictionary.tunnel file.
> -----Original Message----- > From: Olivier PERROT [mailto:[EMAIL PROTECTED] > Sent: Tuesday, April 01, 2003 4:49 AM > To: [EMAIL PROTECTED] > Subject: freeRadiu, 802.1x and Cisco > > > Hi all, > > I'am trying to setup authentication and automatic VLAN > attribution between > freeRadius box and a Cisco switch ... without success until now. > > The deal is to allow mobile users to be on the same VLAN even > if they aren't > using the same port and/or switch all over the campus. > > Authentication is working well with eap or leap but I'am not > able to deliver > VLAN information to Cisco device. I tried several mix of theses > configurations : > > 1) Cisco-AVPAIR = "tunnel-private-group-Id=40 tunnel-type=13 > tunnel-medium-type=6" > 2) Tunnel-Type=VLAN, > 3) Tunnel-Medium-Type=802 > 4) Tunnel-Private-Group-Id=40 > 5) Cisco-AVPAIR = "tunnel-type=VLAN tunnel-medium-type=802 media(6) > tunnel-private-group-ID=admin" > > None of them are working. > > Any ideas ? > > Thank you very much in advance, > > Olivier PERROT > > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
