In my WLAN I use the Orinoco AP2000 Access Points, and they are configured
to do the authentication with a freeRadius Server using the 802.1x
protocol. The Access Point clients are WinXP and authenticate themselves
with chap password. This authentication is always rejected by the server.
When debbuging the freeRadius I get the following message:
***************************************************************
Threads:
total/active/spare threads = 5/1/4
Waking up in 5 seconds...
Thread 3
handling request 176, (32 handled so far)
User-Name = "steve"
NAS-IP-Address = 192.168.33.3
Called-Station-Id = "00-02-2d-48-5f-ad"
Calling-Station-Id = "00-02-2d-88-71-3d"
NAS-Identifier = "ORiNOCO AP-2000"
Framed-MTU = 1400
NAS-Port-Type = Wireless-802.11
EAP-Message = "\002\206\000\n\001steve"
Message-Authenticator = 0x7cdb58060b48171b109623c2173416ac
modcall: entering group authorize
modcall[authorize]: module "preprocess" returns ok rlm_chap: Could not
find proper Chap-Password attribute in request
modcall[authorize]: module "chap" returns noop
modcall[authorize]: module "mschap" returns notfound
rlm_realm: No '@' in User-Name = "steve", looking up realm NULL
rlm_realm: No such realm NULL
modcall[authorize]: module "suffix" returns noop
users: Matched steve at 80
modcall[authorize]: module "files" returns ok modcall: group authorize
returns ok
rad_check_password: Found Auth-Type Local auth: type Local auth: No
User-Password or CHAP-Password attribute in the request auth: Failed to
validate the user. Delaying request 176 for 1 seconds Finished request 176
***************************************************************************
I think that the freeRadius configuration is alright, because i've tested
it with some LAN clients and it worked normally. Is there any possibility
of the software of the Access point and the software from the freeRadius
being incompatible?
Thanks for any help you can give me.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
