Hi All,
Good Day! My NT domains users can already login to my redhat 7.3
using the pam_winbind module. However, when I try to use it in my Cisco
using a PAP authentication, I can't authenticate using NT domain users to
cisco terminal server. When I check in cisco terminal server, the username
and async modem stay only form around 15 seconds and hang up my RAS
connections. See my logs below:-
Do I need pam_radius module to enable to authenticate my RAS clients
using freeradius for this kind of setup beside of my pam_winbindd modules?
Any suggestion and advise are very welcome and appreciated. Many thanks.
Ready to process requests.
rad_recv: Access-Request packet from host 10.76.16.3:1645, id=12, length=76
NAS-IP-Address = 10.76.16.3
NAS-Port = 65
NAS-Port-Type = Async
User-Name = "jungab"
User-Password = "s1langan"
Service-Type = Framed-User
Framed-Protocol = PPP
modcall: entering group authorize
modcall[authorize]: module "preprocess" returns ok
rlm_chap: Could not find proper Chap-Password attribute in request
modcall[authorize]: module "chap" returns noop
modcall[authorize]: module "mschap" returns ok
rlm_realm: No '@' in User-Name = "jungab", looking up realm NULL
rlm_realm: No such realm NULL
modcall[authorize]: module "suffix" returns noop
users: Matched DEFAULT at 152
users: Matched DEFAULT at 157
modcall[authorize]: module "files" returns ok
modcall: group authorize returns ok
rad_check_password: Found Auth-Type SMB
auth: type "SMB"
modcall: entering group authtype
Regards
Jay Ungab
Jardine Direct Company Inc - OSSC
3/F, Jardine Davies Building
222 Sen. Gil J. Puyat Avenue
Makati City, Philippines
Telephone: +63 2 8920190 extension 231
Voice/IP (from ATL & Devon): 50-1110-231
Fax: +63 2 8939569
Network Team Mobile: +63 918 9225905
Email: [EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
