Thanks Chris for your advice. As I mentioned in my e-mail, I specified the option to compile with snmp. What can cause not compiling with SNMP though I specified that? Could it be a bug in the version I'm using (I'm using the latest version).
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Chris van Meerendonk Sent: June 19, 2003 6:12 PM To: [EMAIL PROTECTED] Subject: Re: Radius does not try to register with SMUX- REPOSTED It looks like your freeradius isn't compiled with snmp support, although you specified it. The only way of *not* getting the SMUX messages in debug mode was to compile freeradius again with --enable-snmp=no. Please double check that snmp support was compiled. Since it's default, you dont have to specify the --enable-snmp feature. Chris On Wed, 2003-06-18 at 23:06, Yousef Jamous wrote: > Sorry for the previous posting, it was with some HTML lines. > I'm trying to use net-snmp V5.0.8 to get information from my free-radius > server (V 0.8.1). > > I did the following: > Compiled radius server with --enable-snmp option > net-snmp was compiled with SMUX option module > Radius MIBS are accessible by the snmpd > In the radius snmp.cof file I put: > smux_password = secretpassword > snmp_write_access = no > snmpd.conf contains the line > smuxpeer .1.3.6.1.4.1.3317.1.3.1 secretpassword > When I run the command: > snmpd -f -a -V -L -Dsmux > smux_init: [smux_init] done; smux listen sd is 8, smux port is 199 > smux_conf: parsing registration for: 1.3.6.1.4.1.3317.1.3.1 > secretpassword > NET-SNMP version 5.0.8 > > When I launch radiusd using radiusd -xxx, I see the logs, I do not see > an entry showing that the radiusd has connected to the SMUX. > My log file looks something like: > > Starting - reading configuration files ... > reread_config: reading radiusd.conf > Config: including file: /usr/local/etc/raddb/proxy.conf > Config: including file: /usr/local/etc/raddb/clients.conf > Config: including file: /usr/local/etc/raddb/snmp.conf > Config: including file: /usr/local/etc/raddb/sql.conf > main: prefix = "/usr/local" > main: localstatedir = "/usr/local/var" > main: logdir = "/usr/local/var/log/radius" > main: libdir = "/usr/local/lib" > main: radacctdir = "/usr/local/var/log/radius/radacct" > main: hostname_lookups = no > main: max_request_time = 30 > main: cleanup_delay = 5 > main: max_requests = 1024 > main: delete_blocked_requests = 0 > main: port = 0 > main: allow_core_dumps = no > main: log_stripped_names = no > main: log_file = "/usr/local/var/log/radius/radius.log" > main: log_auth = yes > main: log_auth_badpass = no > main: log_auth_goodpass = no > main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid" > main: user = "(null)" > main: group = "(null)" > main: usercollide = no > main: lower_user = "no" > main: lower_pass = "no" > main: nospace_user = "no" > main: nospace_pass = "no" > main: checkrad = "/usr/local/sbin/checkrad" > main: proxy_requests = yes > proxy: retry_delay = 5 > proxy: retry_count = 3 > proxy: synchronous = no > proxy: default_fallback = yes > proxy: dead_time = 120 > proxy: servers_per_realm = 15 > security: max_attributes = 200 > security: reject_delay = 1 > security: status_server = no > main: debug_level = 0 > read_config_files: reading dictionary > read_config_files: reading naslist > read_config_files: reading clients > read_config_files: reading realms > radiusd: entering modules setup > Module: Library search path is /usr/local/lib > Module: Loaded expr > Module: Instantiated expr (expr) > Module: Loaded PAP > pap: encryption_scheme = "crypt" > Module: Instantiated pap (pap) > Module: Loaded CHAP > Module: Instantiated chap (chap) > Module: Loaded MS-CHAP > mschap: ignore_password = no > mschap: use_mppe = yes > mschap: require_encryption = no > mschap: require_strong = no > mschap: passwd = "(null)" > mschap: authtype = "MS-CHAP" > Module: Instantiated mschap (mschap) > Module: Loaded System > unix: cache = no > unix: passwd = "(null)" > unix: shadow = "(null)" > unix: group = "(null)" > unix: radwtmp = "/usr/local/var/log/radius/radwtmp" > unix: usegroup = no > unix: cache_reload = 600 > Module: Instantiated unix (unix) > Module: Loaded preprocess > preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" > preprocess: hints = "/usr/local/etc/raddb/hints" > preprocess: with_ascend_hack = no > preprocess: ascend_channels_per_line = 23 > preprocess: with_ntdomain_hack = no > preprocess: with_specialix_jetstream_hack = no > preprocess: with_cisco_vsa_hack = no > Module: Instantiated preprocess (preprocess) > Module: Loaded realm > realm: format = "suffix" > realm: delimiter = "@" > Module: Instantiated realm (suffix) > Module: Loaded files > files: usersfile = "/usr/local/etc/raddb/users" > files: acctusersfile = "/usr/local/etc/raddb/acct_users" > files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" > files: compat = "no" > Module: Instantiated files (files) > Module: Loaded Acct-Unique-Session-Id > acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, > Client-I= > P-Address, NAS-Port-Id" > Module: Instantiated acct_unique (acct_unique) > Module: Loaded detail > detail: detailfile = > "/usr/local/var/log/radius/radacct/%{Client-IP-Addr= > ess}/detail-%Y%m%d" > detail: detailperm = 384 > detail: dirperm = 493 > detail: locking = no > Module: Instantiated detail (detail) > Module: Loaded radutmp > radutmp: filename = "/usr/local/var/log/radius/radutmp" > radutmp: username = "%{User-Name}" > radutmp: perm = 384 > radutmp: callerid = yes > Module: Instantiated radutmp (radutmp) > Initializing the thread pool... > thread: start_servers = 5 > thread: max_servers = 32 > thread: min_spare_servers = 3 > thread: max_spare_servers = 10 > thread: max_requests_per_server = 0 > thread: cleanup_delay = 5 > Thread spawned new child 1. Total threads in pool: 1 > Thread 1 waiting to be assigned a request > Thread 2 waiting to be assigned a request > Thread spawned new child 2. Total threads in pool: 2 > Thread spawned new child 3. Total threads in pool: 3 > Thread 3 waiting to be assigned a request > Thread spawned new child 4. Total threads in pool: 4 > Thread 4 waiting to be assigned a request > Thread 5 waiting to be assigned a request > Thread spawned new child 5. Total threads in pool: 5 > Listening on IP address *, ports 1812/udp and 1813/udp, with proxy on > 1814/= > udp. > Ready to process requests. > > I saw in archive list some lines like > > SMUX connect try 2 > Can't connect to SNMP agent with SMUX: Connection refused > --- Walking the entire request list --- > Waking up in 6 seconds... > SMUX connect try 3 > Can't connect to SNMP agent with SMUX: Connection refused > > > Why my radiusd does not try to register?? > > I would appreciate very much your help. > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
