hi,
i have installed the freeradius 0.8.1 RPM from mandrake on a mandrake 9.1 system and
also the same distri with a cistron 1.6.6 on another server.
now i have following problem:
within the hints file i have defined several "pools" for a cisco router with are
seperated trough the PREFIX.
example from hints file:
DEFAULT Prefix = "n", Strip-User-Name = No
Auth-Type = Local,
Hint = "Poelten",
Cisco-AVPair = "ip:addr-pool=noe",
Service-Type = Framed-User,
Framed-Protocol = PPP,
Fall-Through = Yes
DEFAULT Prefix = "o", Strip-User-Name = No
Auth-Type = Local,
Hint = "Linz",
Cisco-AVPair = "ip:addr-pool=ooe",
Service-Type = Framed-User,
Framed-Protocol = PPP,
Fall-Through = Yes
DEFAULT Prefix = "w", Strip-User-Name = No
Auth-Type = Local,
Hint = "Vienna",
Cisco-AVPair = "ip:addr-pool=wie",
Service-Type = Framed-User,
Framed-Protocol = PPP,
Fall-Through = Yes
on the cistron install this works fine and every user is given the correct "pool".
on the freeradius install i allways get the first defined pool, in my example
'Cisco-AVPair = "ip:addr-pool=noe"' -> within the radiusd.conf file i have set the
compat users mode to cistron.
is this a generell known problem ?
or a rpm specific ?
any ideas ?
best regards
hannes fuchs
------------------------------------------------------------
www.eduhi.at www.schule.at
------------------------------------------------------------
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
