I don't know much about Proxying but I think that @ is often used as a delimitter for proxy-radius, you may fall into a realm scheme if you use logins with @ ... Make sure to disable proxy in radiusd.conf
Nicolas > -----Message d'origine----- > De : [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] la part de Robert > Canary > Envoye : jeudi 10 juillet 2003 16:47 > A : [EMAIL PROTECTED] > Objet : Re: Please Help me about Freeradius! > > > If I'm not mistaken...I believe freeradius has some rewrite > capablilities that can be used on the User-Name. I remember someone > posting before with issues of trying to get his algorithm correct. > > I don't know the sytax, but you get the general idea. You need to use > the attr_rewrite > > > attr_rewrite add_at { > attribute = User-Name > searchin = packet > searchfor = "^[(a-z0-9)\\000(a-z0-9)]+$" > replacewith = [EMAIL PROTECTED] > ignore_case = yes > new_attribute = no > max_matches = 1 > append = no > > > Thassanai Mhuansean wrote: > > > > My system: > > FreeBSD 4.8 + freeradius-0.8.1 authentication with mysql . > > Access server is Cisco 3640 series and IOS version 12.2. > > > > My Question: > > I use RAN (Remote Access Network) to Router 3640 by > > username: [EMAIL PROTECTED] and > > password: test555 > > when I used authentication on router 3640, it 's OK. > > But when I used radius authentication and into debug mode it shown. > > > > > > rad_recv: Accounting-Request packet from host 203.121.143.20:1646, > > id=114, length=203 > > Acct-Session-Id = "00000119" > > Tunnel-Server-Endpoint:0 = "172.21.250.34" > > Tunnel-Client-Endpoint:0 = "172.21.129.6" > > Tunnel-Assignment-Id:0 = "session-id" > > Tunnel-Type:0 = L2TP > > Acct-Tunnel-Connection = "265" > > Tunnel-Client-Auth-Id:0 = "LAC" > > Tunnel-Server-Auth-Id:0 = "session-id" > > Framed-Protocol = PPP > > Acct-Authentic = Local > > Acct-Status-Type = Start > > User-Name = "qwerty123\000isdn.xxx.com" > > Acct-Multi-Session-Id = "000000BA" > > Acct-Link-Count = 2 > > Framed-IP-Address = 203.x.x.x > > NAS-Port = 2 > > NAS-Port-Type = Virtual > > Service-Type = Framed-User > > NAS-IP-Address = 203.x.x.x > > Acct-Delay-Time = 30 > > > > From above. Username field is encrypted from "@" into "\000" then > > Authentication fail!. > > What should I do? Please help me. > > > > Best regards, > > ================================ > > Thassanai Mhuansean > > System Engineer Wireless > > GMM GRAMMY PCL. > > Mobile: 661 4850300 > > Tel: 662 4850300p2 > > E-mail: [EMAIL PROTECTED] > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
