[EMAIL PROTECTED] wrote on 07/14/2003 10:02:37 AM:
> I have a linux server with Freeradius. The access point (AP) is a Cisco
> AP350 Series.
>
> I configured all the files, and seems to be working using radtest.
>
> When I use my laptop to try to reach the network, the AP drops a warning
> message like:
>
> (Warning): No MAC-Authentication response for Station 00022d0bea39 from
> server 10.4.132.24
>
> Both the server and the AP are in the same network, and the ping
> response from the server to the AP is ok. But when I run the radius
> server with full debug options (-xxyz -l stdout) it does not show any
> message related to the request from the AP. Is that normal? Should not
the
> server show at least the request from the AP, even if I have an error on
> the configuration files?
Check to make sure you've specified a radius port # on the AP. Cisco
defaults to 1645, while FR defaults to 1812.
(yes, you should see FR say _something_ in debug mode. Since it isn't,
you can conclude that FR isn't even seeing the packet.)
Vincent Giovannone
Network Infrastructure Group
Information Services Division
Rush - Presbyterian St. Luke's Medical Center
"A four-year-old will very quickly get over news of the death of Santa if
told that it was due to his fully loaded sleigh crashing in the back
garden."
-- Mil Millington
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
