I can't set ip-address for user.
When I recive Access-Request packet I add to Access-Accept reply field
"Framed-IP-Address = 192.168.164.164"
but my cisco (ubr7200) ignore it and set ip-address for user from
cisco-ip-pool.
I try to remove ip-pool on cisco, but in this way user don't create at all.
I try to send Access-Accept with and without "Framed-IP-Netmask",
"Framed-Protocol", "Service-Type".
Authorize and accounting work normal, if forget about manualy set ip-address
for some users.
I have freeradius 0.8.
rad_recv: Access-Request packet from host 192.168.164.34:1645, id=167,
length=170
NAS-IP-Address = 195.38.164.34
NAS-Port = 1
Cisco-NAS-Port = "Virtual-Access1*"
NAS-Port-Type = Virtual
User-Name = "kern"
Acct-Session-Id = "000001C7"
MS-CHAP-Challenge = 0x09090acf9e70a853
MS-CHAP-Response = 0x540100 ... ecbb4a
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-IP-Address = 192.168.164.164
...
...
Sending Access-Accept of id 167 to 192.168.164.34:1645
Framed-MTU = 576
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-Compression = Van-Jacobson-TCP-IP
MS-CHAP-MPPE-Keys =
0xf03aa0dca9147c4f88a2f3bd8c51e766f90bbd3bcf4ea1e332bb3bf21b7d87cc
MS-MPPE-Encryption-Policy = 0x00000001
MS-MPPE-Encryption-Types = 0x00000006
Framed-IP-Netmask = 255.255.255.128
Framed-IP-Address = 192.168.164.254
...
...
rad_recv: Accounting-Request packet from host 192.168.164.34:1646, id=168,
length=114
NAS-IP-Address = 192.168.164.34
NAS-Port = 1
Cisco-NAS-Port = "Virtual-Access1*"
NAS-Port-Type = Virtual
User-Name = "kern"
Acct-Status-Type = Start
Acct-Authentic = RADIUS
Service-Type = Framed-User
Acct-Session-Id = "000001C7"
Framed-Protocol = PPP
Framed-IP-Address = 192.168.164.164
Acct-Delay-Time = 0
...
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
