Alan DeKok wrote:
> Tero Turtiainen <[EMAIL PROTECTED]> wrote:
> > > Try:
> > >
> > > DEFAULT NAS-Port == `%{rlm_expr: 1 + 2}`
> > > Reply-Message = "Nas port of 3",
> > > Fall-Through = 1
> > >
> > > Send it packets containin NAS-Port of 1, 2, 3, 4, ... and see what
> > > happens.
> >
> > I won't, it is quite obvious what happens in this case :)
>
> If you're not going to listen to my advice, then I don't see why I
> should waste my time trying to help you.
>
> Your ideas about how the server works are wrong. My request above
> was an attempt to get you to educate yourself, so as to better
> understand how the server works. Since you're unwilling to educate
> yourself, I suggest you stop asking questions.
I listen to your advice, after all, you are THE FreeRADIUS-guru and
authority.
But the example above is so trivial that I don't think I need to try that
one (and at the moment, I can't access my FreeRADIUS-test environment).
I *have* educated myself with FreeRADIUS to some extent, so I know that
the expression 1+2=3 and thus the entry will match any request where
NAS-Port=3.
My ideas about how the server works are probably wrong in this case, but
I was lead to the wrong ways by the email you wrote in October and which I
have referred to. Now I am wondering if the information there is correct
or do I have to apply the patch which was in the same thread. After this
discussion it seems that setting attribute values cannot be done, which
was not what I was expecting having read the email archive.
--
<-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=->
< Tero Turtiainen | Yes Sir, may I lick your boots or do your Highness >
< [EMAIL PROTECTED] | use dry cleaning? - Stone >
<-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=->
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
