Try doing an autoconf before ./configure (using autoconf 2.13) Fred
----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 29, 2003 3:16 PM Subject: Re: installation issue > I didn't get any errors during the ./compile. I did get several 'no' > responses but nothing I figured was important for my installation. Rolling > back to 0.8.1 to try that. > > Dylan > > At 09:00 AM 7/29/2003, you wrote: > > > make[1]: Entering directory > > `/usr/local/src/freeradius/freeradius-0.9.0-pre1' > > > Making all in libltdl... > > > make[2]: Entering directory > > > `/usr/local/src/freeradius/freeradius-0.9.0-pre1/libltdl' > > > make[2]: *** No rule to make target `all'. Stop. > > > make[2]: Leaving directory > > > `/usr/local/src/freeradius/freeradius-0.9.0-pre1/libltdl' > > > make[1]: *** [common] Error 1 > > > make[1]: Leaving directory > > `/usr/local/src/freeradius/freeradius-0.9.0-pre1' > > > make: *** [all] Error 2 > > > > > > Per the installation file, I'm attempting to just do > > > $ ./configure > > > $ make > > > $ make install > > > > > > Any help on this? > > > >Did the ./configure finish with an error at all? > > > > > >-- > >----- > >Graeme Hinchliffe (BSc) > >Core Team Member > >Zen Internet (http://www.zen.co.uk) > > > >ICQ 3842605 (link) > > > >Direct: 01706 900 212 > >Sales : 0870 6000 971 > >Fax : 0870 6000 972 > > > > > >- > >List info/subscribe/unsubscribe? See > >http://www.freeradius.org/list/users.html > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
