Thanks Alan. :) - Brian J.
> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Alan Litster > Sent: Thursday, August 14, 2003 5:01 AM > To: [EMAIL PROTECTED] > Subject: RE: Users without a password > > > Have a look at section 5.5 of the FreeRADIUS FAQ, this should > answer your > question - http://www.freeradius.org/faq/#5.5 > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] Behalf Of Brian > > Johnson > > Sent: 14 August 2003 10:45 > > To: [EMAIL PROTECTED] > > Subject: Users without a password > > > > > > I am in the process of helping a customer of ours figure this out. > > > > He purchased a bunch of users from a competitor, but they > can not provide > > him with the passwords (only usernames). What I want to do is > > allow for the > > user to pass any password, but then log what they passed. > > > > I have set the following in radiusd.conf: > > > > log_auth = yes > > log_auth_badpass = yes > > log_auth_goodpass = yes > > > > And have created a users file as such: > > > > testuser Auth-Type := Local, User-Password =* "test" > > Fall-Through = Yes > > > > DEFAULT Auth-Type := Local > > Service-Type = Framed-User, > > Framed-Protocol = PPP, > > Framed-MTU = 1500, > > Framed-Compression = Van-Jacobsen-TCP-IP > > > > This isn't working. I am using radtest and getting the > following results: > > > > [EMAIL PROTECTED] raddb]# radtest testuser test 127.0.0.1:1812 0 > testing123 > > Sending Access-Request of id 107 to 127.0.0.1:1812 > > User-Name = "testuser" > > User-Password = "test" > > NAS-IP-Address = wraith.nvc.net > > NAS-Port = 0 > > Re-sending Access-Request of id 107 to 127.0.0.1:1812 > > User-Name = "testuser" > > User-Password = > "H%\201\271\r\361X\315\270zr\262P\367\265\374" > > NAS-IP-Address = wraith.nvc.net > > NAS-Port = 0 > > rad_recv: Access-Reject packet from host 127.0.0.1:1812, > id=107, length=20 > > > > > > The radius.log entries are as such: > > > > Thu Aug 14 15:36:54 2003 : Auth: Login incorrect: > [testuser/test] (from > > client localhost port 0) > > > > > > > > I think the problem is the operator I am using on the > User-Password check > > item, but have tried almost every other "reasonable" operator. > > > > Any other ideas? > > > > - Brian J. > > > > > > - > > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > > -------------------------------------------------------------- > ----------------------------------------- > This email, and any files transmitted with it, is copyright > and may contain confidential information. > The contents are intended for the use of the addressee(s) only. > Unauthorized use may be unlawful. > If you receive this email by mistake, please advise sender > immediately. > The views of the author may not necessarily constitute the > views of Telco Electronics Limited. > Nothing in this mail shall bind Telco Electronics Limited in > any contract or obligation. > > Telco Electronics Limited > 6-8 Oxford Court > Brackley > Northants > NN13 7XY > > Tel 07000 701999 > Fax 07000 701777 > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
