[EMAIL PROTECTED] wrote:
> i have this settings:
>
> My Network: 192.168.202.0/24
> RadiusServer: 192.168.202.58/24 Route: 192.168.202.0/24
> Gateway:192.168.202.59
> Router: 192.168.202.59/24 Route: 192.168.202.0/24
> Gateway:192.168.202.59
> User1Network: 10.20.30.0/24
>
> User1 get IP-Address "192.168.202.50"!
> Radiusd in Debug mode says "sending access-accept"
Radius and routing are diffirent things.
> but no ping and no telnet works
Yes.
Why you need to give user ip from 192.168.202.0/24 ?
> help.....
For normal work you can give to user any ip except ip used in you and
user networks
Have solf the Problem!
The Problem was, the Router don�t know the network 10.20.30.0/24 with WAN
Partner User1.
OK, i can set a static route, but it is not so easy, because i must bind
the network with a WAN-Partner.
My Router have no Entries yet, these are all in the Radius-Server. In this
Situation the Radius must give the NAS the Network-Route.
I implement the Attribute "Framed-Route" in the User1 Dialin-Account
Framed-Route = "10.20.30.0/24 user1 Password"
Now .... everything works fine!
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
