Hi Roman, We have been using X18.0.3 with FreeRadius without problems.
Are you sure, Bay 8000 boots with the new software? A guess, it may be booting from self where the older software image still resides. You will see the software version of the rac when you write admin at administrative mode. - Gunce On Wed, 27 Aug 2003, Roman M. Bibikov wrote: > Hi all! > > I had read some notes about problem with BAY 8000 authentication on > FreeRadius. I use FreeRadius 0.9.0 (final version) and X18.0.3 BAY > software image. Despite of required BAY software image version, > FreeRadius has problem with "invalid Message-Authenticator" again. I see > that all decisions are to upgrade BAY software at least to X18.0.3 > version, but I already have done it. And problem has remained! > > Does somebody know what it is needed to do in this case? > > Thank`s > Roman > > See the log: > > rad_recv: Access-Request packet from host xxx.xxx.xxx.xxx:1424, id=141, > length=191 > Wed Aug 27 10:08:34 2003 : Debug: Thread 1 assigned request 0 > Wed Aug 27 10:08:34 2003 : Debug: --- Walking the entire request list > --- > Wed Aug 27 10:08:34 2003 : Debug: Threads: total/active/spare threads = > 5/1/4 > Wed Aug 27 10:08:34 2003 : Debug: Nothing to do. Sleeping until we see > a request. > Wed Aug 27 10:08:34 2003 : Debug: Thread 1 handling request 0, (1 > handled so far) > Wed Aug 27 10:08:34 2003 : Error: Received packet from xxx.xxx.xxx.xxx > with invalid Message-Authenticator! > Wed Aug 27 10:08:34 2003 : Debug: Server rejecting request 0. > Sending Access-Reject of id 141 to xxx.xxx.xxx.xxx:1424 > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
