I've been working on this for a while and searched the net and archives with no success so I thought I would try this forum.
I am attempting to use FreeRadius 0.9.0 in a network composed largely of Nortel 8600 switches. I built the server on a Sparc Ultra5 running Linux. I had no problem with the initial setup of the server. I used NTradping to verify it was working, then added the MySQL backend and again verified it was still working with no problems. I then moved on to attempt to talk to a switch. I have run into two problems. Number one: I have a short list of attributes and values specific for these boxes that I got from Nortel but they conflict with some of the default attributes. In particular the Ascend-Pre-Output-Packets attribute. Here is the list I need: ATTRIBUTE Access-Priority 193 integer VALUE Access-Priority None-Access 0 VALUE Access-Priority Read-Only-Access 1 VALUE Access-Priority L1-Read-Write-Access 2 VALUE Access-Priority L2-Read-Write-Access 3 VALUE Access-Priority L3-Read-Write-Access 4 VALUE Access-Priority Read-Write-Access 5 VALUE Access-Priority Read-Write-All-Access 6 ATTRIBUTE Cli-Command 193 string I attempted to add these to the dictionary in several places following the man page and comments in the dictionary file and no attempt seemed to work properly. Where and how do I properly add these? The second question I have relates to a log entry. Even when I get an Access-Accept I find a log entry like this: Error: rlm_eap: EAP-Message not found After which I do not get authenticated to the switch. Using a sniffer I was able to verify that an Access-Accept was sent but still no access. Is this just a config error on my part or is there a bigger problem? Is anyone else using Freeradius with this type of gear? Any help would be appreciated. -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Darren R. Weber PGP Key available at http://www.keyserver.net ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
