Hi Tom,

I'm using this on a MaxTNT NAS. Maybe your NAS also supports it. From the
MaxTNT:

IO-Admin >read answer
ANSWER-DEFAULTS read
IO-Admin >set clid-auth-mode ?
clid-auth-mode:
 Specifies how calling line identification (CLID) will be used for
 incoming call authentication.
Enumerated field, values:
 ignore:  Don't require a matching ID.
 clid-require:  The CLID must be valid and match the value in the stored
     profile. If the profile also requires pap/chap/etc then do that in
     addition.
 clid-prefer:  Authenticate using the CLID if provided by the telco
switch,
     otherwise fall back to using the encapsulation protocol's
authentication.
     If CLID authentication fails, refuse the call.
 clid-first:  First authenticate using the CLID if provided by the telco
     switch. If CLID authentication fails, fall back to using the
encapsulation
     protocol's authentication.
 clid-fallback:  Authenticate using the CLID when RADIUS is available,
     otherwise fallback to using the encapsulation protocol's
authentication.
 dnis-require:  The Called # must be valid and match the value in the
stored
     profile. If the profile also requires pap/chap/etc then do that in
     addition.
 dnis-pref:  Authenticate using the Called # if provided by the telco
switch,
     otherwise fall back to using the encapsulation protocol's
authentication.
     If DNIS authentication fails, refuse the call.
 dnis-first:  First authenticate using the Called # if provided by the
telco
     switch. If Called # authentication fails, fall back to using the
     encapsulation protocol's authentication.

Regards,

Chris

On Fri, 5 Sep 2003, Tom Myren wrote:

> Hi
> I would like to have Freeradius proxy a request to a LDAP server that will
> check the calling-station-id
> against a "white-list" (check to see if we can bill that number).
> If this results in an accept, then the original request should be proxied to
> a home radius server.
>
> Another possibility would be to proxy the request in parallell and only
> allow the user if both proxy requests gave an accept response.
>
> Can this be done?
> If so, I will be greatful for any advice.
>
> Tom Myren
> NetCom AS
> Norway
>
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>

- 
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Reply via email to