Hi Arthur, It is that simple ! Thank you for pointing me into the right direction. I setted the WEP keys manual in the AP, next to the Radius config. At the moment only 64bits. My WindowsXP is without SP1, so for the moment it is working, although i want to move to EAP/TLS.
----- Original Message ----- From: "Artur Hecker" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, September 10, 2003 12:36 PM Subject: Re: EAP/MD5 question > hi > > > > I would like some help configuring my Freeradius. > > I just started with Freeradius and i am not that familiar with > > wireless/certificates so i thougt to start with EAP/MD5 isof EAP/TLS. > > your EAP/MD5 is working but check www.freeradius.org/doc/EAP-MD5.html > > > > At this moment it looks like i can authenticate with my WinXP wireless > > client with Radius. > > not on wireless if your WinXP is SP1 (or later)... > > > > After this first step, i believe WEP keys need to be negotiated, but i > > think i have that part missing/wrong. > > no, no WEP keys are EVER negotiated in EAP/MD5. sorry, you have to set > those manually - the same in the AP and the STA. > > > > My AP is configurable for 64 / 128 / 256 keys incombination with Radius. > > Also no ip adress is provided, wich normally is dhcp. I guess this only > > starts after WEP is enabled correctly. > > that's correct. and it doesn't work if something is wrong. 256 bit keys > are not standard. your card should be from the same vendor then. > > > > I tried several options from the documentation / newsgroup but i could > > not find a satisfactory answer. Most use use EAP/TLS. > > because of dynamic WEP keys which are possible with EAP/TLS > > > > Log from Dlink950+ : > > Sep 10 08:52:23 accesspoint Wireless PC connected 00-06-25-A8-1A-41^M > > Sep 10 08:52:23 accesspoint EAP-Request/Identity ^M > > Sep 10 08:52:27 accesspoint EAP-Request/Identity ^M > > Sep 10 08:52:28 accesspoint EAP-Response/Identity test^M > > Sep 10 08:52:28 accesspoint EAP-Success 00-06-25-A8-1A-41^M > > Sep 10 08:52:28 accesspoint Authentication success 00-06-25-A8-1A-41^M > > your EAP/MD5 is working. > > > > Sending Access-Accept of id 6 to 192.168.1.50:1208 > > Service-Type = Framed-User > > Framed-IP-Address = 192.168.1.60 > > EAP-Message = 0x03020004 > > Message-Authenticator = 0x00000000000000000000000000000000 > > Finished request 1 > > idem. > > > -> set the WEP keys > > > > ciao > artur > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
