Greetings,
I have managed to get this most of the way configured on my own, however
the lack of docs has lead to me a dead end. I cannot seem to get the Aironet
to do an Auth request, only an Accounting request. Cisco isn't much help
unfortunately so I will post my config below as well as the debug responses,
hopefully someone can find my mistake. Ideally I would like to create a DB
of allowable MAC addresses via mysql and have the AP's refference that,
denying all requests not on that list.
Thanks,
David
[EMAIL PROTECTED] sbin]# ./radiusd -X
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /usr/local/etc/raddb/proxy.conf
Config: including file: /usr/local/etc/raddb/clients.conf
Config: including file: /usr/local/etc/raddb/snmp.conf
Config: including file: /usr/local/etc/raddb/sql.conf
main: prefix = "/usr/local"
main: localstatedir = "/usr/local/var"
main: logdir = "/usr/local/var/log/radius"
main: libdir = "/usr/local/lib"
main: radacctdir = "/usr/local/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/usr/local/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
main: user = "(null)"
main: group = "(null)"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/local/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = yes
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
Using deprecated clients file. Support for this will go away soon.
read_config_files: reading realms
Using deprecated realms file. Support for this will go away soon.
radiusd: entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: passwd = "(null)"
mschap: authtype = "MS-CHAP"
Module: Instantiated mschap (mschap)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
rlm_eap: Loaded and initialized the type md5
rlm_eap: Loaded and initialized the type leap
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
preprocess: hints = "/usr/local/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
Module: Instantiated realm (suffix)
Module: Loaded SQL
sql: driver = "rlm_sql_mysql"
sql: server = "localhost"
sql: port = ""
sql: login = "root"
sql: password = ""
sql: radius_db = "radius"
sql: acct_table = "radacct"
sql: acct_table2 = "radacct"
sql: authcheck_table = "radcheck"
sql: authreply_table = "radreply"
sql: groupcheck_table = "radgroupcheck"
sql: groupreply_table = "radgroupreply"
sql: usergroup_table = "usergroup"
sql: nas_table = "nas"
sql: dict_table = "dictionary"
sql: sqltrace = no
sql: sqltracefile = "/usr/local/var/log/radius/sqltrace.sql"
sql: deletestalesessions = yes
sql: num_sql_socks = 5
sql: sql_user_name = "%{User-Name}"
sql: default_user_profile = ""
sql: query_on_not_found = no
sql: authorize_check_query = "SELECT id,UserName,Attribute,Value,op FROM
radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id"
sql: authorize_reply_query = "SELECT id,UserName,Attribute,Value,op FROM
radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id"
sql: authorize_group_check_query = "SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupche
ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE
usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName =
radgroupcheck.GroupName ORDER BY radgroupcheck.id"
sql: authorize_group_reply_query = "SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrouprep
ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE
usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName =
radgroupreply.GroupName ORDER BY radgroupreply.id"
sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S',
AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime),
AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay =
%{Acct-Delay-Time} WHERE AcctSessionTime=0 AND AcctStopTime=0 AND
NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
sql: accounting_update_query = "UPDATE radacct SET FramedIPAddress =
'%{Framed-IP-Address}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND
UserName = '%{SQL-User-Name}' AND NASIPAddress= '%{NAS-IP-Address}' AND
AcctStopTime = 0"
sql: accounting_start_query = "INSERT into radacct (RadAcctId,
AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId,
NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets,
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType,
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('',
'%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S',
'0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')"
sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S',
AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}'
WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}'
AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime = 0"
sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S',
AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets =
'%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}',
AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE
AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND
NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime = 0"
sql: accounting_stop_query_alt = "INSERT into radacct (RadAcctId,
AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId,
NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets,
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType,
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('',
'%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}',
DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0})
SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '',
'%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}',
'%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0',
'%{Acct-Delay-Time}')"
sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE
UserName='%{SQL-User-Name}'"
sql: connect_failure_retry_delay = 60
sql: simul_count_query = "SELECT COUNT(*) FROM radacct WHERE
UserName='%{SQL-User-Name}' AND AcctStopTime = 0"
sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName,
NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol
FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0"
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to [EMAIL PROTECTED]:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
Module: Instantiated sql (sql)
Module: Loaded files
files: usersfile = "/usr/local/etc/raddb/users"
files: acctusersfile = "/usr/local/etc/raddb/acct_users"
files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port-Id"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile =
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded System
unix: cache = no
unix: passwd = "(null)"
unix: shadow = "(null)"
unix: group = "(null)"
unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded radutmp
radutmp: filename = "/usr/local/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on IP address *, ports 1812/udp and 1813/udp, with proxy on
1814/udp.
Ready to process requests.
rad_recv: Accounting-Request packet from host 172.24.236.118:1027, id=1,
length=188
Acct-Status-Type = Start
User-Name = "00022d18b500"
Acct-Session-Id = " d00001"
Acct-Authentic = Local
NAS-Port = 37
Calling-Station-Id = "00022d18b500"
NAS-Identifier = "AP350-53d936"
NAS-IP-Address = 172.24.236.118
Cisco-AVPair = "vlan-id=0"
Cisco-AVPair = "nas-location="
Cisco-AVPair = "auth-algo-type=open"
Cisco-AVPair = "ssid=Stanford"
Acct-Delay-Time = 0
modcall: entering group preacct
modcall[preacct]: module "preprocess" returns noop
rlm_realm: No '@' in User-Name = "00022d18b500", looking up realm NULL
rlm_realm: Found realm "NULL"
rlm_realm: Adding Stripped-User-Name = "00022d18b500"
rlm_realm: Proxying request from user 00022d18b500 to realm NULL
rlm_realm: Adding Realm = "NULL"
rlm_realm: Accounting realm is LOCAL.
modcall[preacct]: module "suffix" returns noop
modcall: group preacct returns noop
modcall: entering group accounting
rlm_acct_unique: WARNING: Attribute NAS-Port-Id was not found in request,
unique ID MAY be inconsistent
rlm_acct_unique: Hashing ',Client-IP-Address = 172.24.236.118,NAS-IP-Address
= 172.24.236.118,Acct-Session-Id = " d00001",User-Name = "00022d18b500"'
rlm_acct_unique: Acct-Unique-Session-ID = "ad0571a9ef3802f3".
modcall[accounting]: module "acct_unique" returns ok
radius_xlat:
'/usr/local/var/log/radius/radacct/172.24.236.118/detail-20030918'
rlm_detail:
/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands
to /usr/local/var/log/radius/radacct/172.24.236.118/detail-20030918
modcall[accounting]: module "detail" returns ok
modcall[accounting]: module "unix" returns ok
radius_xlat: '00022d18b500'
rlm_sql (sql): sql_set_user escaped user --> '00022d18b500'
radius_xlat: 'INSERT into radacct (RadAcctId, AcctSessionId, AcctUniqueId,
UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime,
AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start,
ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId,
CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol,
FramedIPAddress, AcctStartDelay, AcctStopDelay) values('', ' d00001',
'ad0571a9ef3802f3', '00022d18b500', 'NULL', '172.24.236.118', '37', '',
'2003-09-18 11:04:37', '0', '0', 'Local', '', '', '0', '0', '',
'00022d18b500', '', '', '', '', '0', '0')'
rlm_sql (sql): Reserving sql socket id: 4
rlm_sql (sql): Released sql socket id: 4
modcall[accounting]: module "sql" returns ok
radius_xlat: '/usr/local/var/log/radius/radutmp'
radius_xlat: '00022d18b500'
modcall[accounting]: module "radutmp" returns ok
modcall: group accounting returns ok
Sending Accounting-Response of id 1 to 172.24.236.118:1027
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 1 with timestamp 3f69f3b5
Nothing to do. Sleeping until we see a request.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
