On Thu, 25 Sep 2003 14:28:33 +0200
Thomas MARCHESSEAU <[EMAIL PROTECTED]> wrote:
> Hi All,
>
> Specs:
> - Freeradius 0.9.1, on debian woody
> - 2 Radius servers , 2 radius proxys (sharing a virtual IP)
>
> Everything is working fine except that i would like to add (or
> increment) tags to freeradius attributes ie:
>
> [EMAIL PROTECTED]:~$ ./radtest [EMAIL PROTECTED] ipdyn 172.16.129.4 1812
> testing123 Sending Access-Request of id 186 to 172.16.129.4:1812
> User-Name = "[EMAIL PROTECTED]"
> User-Password = "ipdyn"
> NAS-IP-Address = 172.16.69.1
> NAS-Port = 1812
> rad_recv: Access-Accept packet from host 172.16.129.4:1812, id=186,
> length=188
> Session-Timeout = 86400
> Idle-Timeout = 180
> Tunnel-Medium-Type:0 = IP
> <=
> Here
> Tunnel-Server-Endpoint:0 = "172.18.21.3" <=
> here
> etc ...
> Tunnel-Assignment-Id:0 = "tunnel-172.16.21.3"
> Tunnel-Client-Auth-Id:0 = "LNS-NET7-1"
> Tunnel_Local_Name = "LNS-NET7-1"
> Tunnel-Type:0 = L2TP
> Tunnel-Server-Auth-Id:0 = "srv44-2.idf1.realm.net"
> Tunnel_Remote_Name = "srv44-2.idf1.realm.net"
> Proxy-State = 0x31
> Service-Type = Framed-User
> [EMAIL PROTECTED]:~$
>
> The tag is 0 , but i would like to obtain something like that
>
> Tunnel-Server-Endpoint:1 = "172.18.21.3"
>
> Any idea ?
>
Is there anything that prevents you from saying
[EMAIL PROTECTED] Password == "ipdyn"
Tunnel-Server-Endpoint:0 = "172.18.21.3",
Tunnel-Server-Endpoint:1 += "172.18.21.3",
etc.
?
Or did you want the tag to change somewhere?
Or did I completely miss your question?
Actually, the RFC (2868) says that tag-numbering is 0x01 thru 0x1F, which means you
should start on 1, although 0 is valid, meaning "no tag".
I'm not sure if there are radius clients, that are very particular about this.
--
best regards
Nils Ronhovde
Telenor
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
