Hi folks,
In last time I have spend hours and hour to find out solution for delivering
an IP address to my wireless LAN station after successful authentication.
I'v tried framed-ip-address parameter for delivering static IP address to AP
but it shows no reactions.
In some discussion I have found similar problem and they talk about
rlm_ippool but I thing this module is only for dynamic IP allocation. But
what is the distribution way of this IP address?
What I am doing wrong? Or what kind of mechanism should I use for
transporting the information from framed-ip-address parameter (which is send
to AP in access-accept message) to station?
Or should I use some script to manipulate the DHCPd setting?
I use cisco 1200 WLAN AP with 802.1X and EAP-TLS authentication and the
configuration in users file is:
"ROMAN J" Auth-Type := EAP
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 10.0.0.111,
Framed-IP-Netmask = 255.255.255.0
I welcome all ideas.
Regards
Roman
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
