Hi, OK, so I see part of the problem. My old freeradius used /etc/raddb for it's conf files and /var/log/radiusd-freeradius for it's log files. This new one seems to want to use /usr/local/etc/raddb for it's conf files and /usr/local/var/log/radius for it's logfiles. I'ld like to have this work the old way. What should I do?
Lisa Casey ---- Original Message ----- From: "Lisa Casey" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, October 14, 2003 12:03 PM Subject: Upgrading freeradius > Hi, > > I just upgraded from freeradius 0.4 to freeradius 0.9.1. I thought I was > logging the output of configure, make and make install, but it did not log > so I lost that. The radius binary was installed in /usr/local/sbin, and my > old binary is in /usr/sbin so I cacked up the 0.4 binary and copied the > 0.9.1 binary there. The reported version is 0.9.1: > > [EMAIL PROTECTED]:/etc/raddb# radiusd -v > radiusd: FreeRADIUS Version 0.9.1, for host i686-pc-linux-gnu, built on Oct > 14 2003 at 11:00:34 > > Testing in debug mode seems OK: > > radtest lisakc xxxxxx localhost 0 > > rad_recv: Access-Request packet from host 127.0.0.1:33372, id=75, length=58 > User-Name = "lisakc" > User-Password = "xxxxxx" > NAS-IP-Address = 255.255.255.255 > NAS-Port = 0 > modcall: entering group authorize > modcall[authorize]: module "preprocess" returns ok > modcall[authorize]: module "chap" returns noop > rlm_eap: EAP-Message not found > modcall[authorize]: module "eap" returns noop > rlm_realm: No '@' in User-Name = "lisakc", looking up realm NULL > rlm_realm: No such realm "NULL" > modcall[authorize]: module "suffix" returns noop > users: Matched DEFAULT at 152 > modcall[authorize]: module "files" returns ok > modcall[authorize]: module "mschap" returns noop > modcall: group authorize returns ok > rad_check_password: Found Auth-Type System > auth: type "System" > modcall: entering group authenticate > modcall[authenticate]: module "unix" returns ok > modcall: group authenticate returns ok > Sending Access-Accept of id 75 to 127.0.0.1:33372 > Finished request 1 > Going to the next request > --- Walking the entire request list --- > Waking up in 6 seconds... > --- Walking the entire request list --- > Cleaning up request 1 ID 75 with timestamp 3f8c1d3e > Nothing to do. Sleeping until we see a request. > > But when I attempt to log in via one of my NAS'es it doesn't work: > > rad_recv: Access-Request packet from host 65.207.130.7:1028, id=5, length=58 > Ignoring request from unknown client 65.207.130.7:1028 > > client 65.207.130.7 is in /etc/raddb/clients.conf. I haven't changed any of > the configuration files (and I might point out that I haven't done anything > with the dictionary file yet either). I dunno what's wrong here. Any ideas?? > > Thanks , > > Lisa Casey > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
