Jean-Marie GUILLEMOT <[EMAIL PROTECTED]> wrote: > These are the RADIUS user attributes used for vlan-id assignment. Each > attribute must have a common Tag value to identify the grouped relationship. > > IETF 64 (Tunnel Type): Set this attribute to VLAN > IETF 65 (Tunnel Medium Type): Set this attribute to 802 > IETF 81 (Tunnel Private Group ID): Set this attribute to vlan-id > " > > I'm not perfectly bilingual, but I understand that my AP is expecting the > attributes VLAN, 802 and the VLAN-ID
No. Read the 'dictionary.tunnel' file. "VLAN" is a name for the value "13" for the attribute Tunnel-Type. "802" is the name for the value "6" for the attribue Tunnel-Medium-Type. The Tunnel-Private-Group-Id attribute is of type string, so the value inside of it should be a string representation of the vlan-id. > "vlan-id" is not a string, it's an integer for CISCO (for instance, in my > WLAN the SSID "teacher" is mapped to VLAN 10 : 10 is the vlan-id) It can still be sent as the string "10". > But be sure that before bothering the mailing list, I tried to make it work > without making any change to the dictionaries : > " > jmguillemot Auth-Type := eap, User-Password == "XXXXX" > Service-Type = Login-User, > Tunnel-Type = VLAN, > Tunnel-Medium-Type = IEEE-802, > Tunnel-Private-Group-Id = teacher > " "teacher"? That's the SSID. Did the documentation not say to use the vlan-id, NOT the SSID? Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
