> From: 野村 建
> Sent: Monday, 20 October 2003 6:35 PM
> I want my freeradius server to send Access-Reject packet with Reply-Message
> in it,
> so that NAS can alert user when authentication fails. But, it's not
> working so far.
> When authentication succeeds, my freeradius server sends Access-Accept
> packet
> with Reply-Message in it. But when authentication fails, it sends Access
> Reject packet
> with no Reply-Message in it..
> So my question is why my freeradius doesn't include Reply-Message into
> Access-Reject
> packet, and how can I fix this problem?
> -------users--------
> [EMAIL PROTECTED] Auth-Type :=Local, User-Password == "secret"
> Service-Type = Framed-User,
> Framed-Protocol = PPP,
> Framed-IP-address = 192.168.200.1,
> Framed-IP-Netmask = 255.255.255.0,
> Session-Timeout = 30,
> Reply-Message="1111111111111111111111111111111",
> Reply-Message="2222222222222222222222222222222",
> Reply-Message="3333333333333333333333333333333",
>
As you've observed, this will only add a Reply-Message if the authentication
succeeds. In the same way as it will only give an IP address or Session
Timeout if it succeeds.
As for how to send a Reply-Message on failure, I dunno off hand. :-)
--
Paul "TBBle" Hampson
Bubblesworth Pty Ltd (ABN: 51 095 284 361)
[EMAIL PROTECTED]
On a sidewalk near Portland State
University someone wrote `Trust Jesus', and
someone else wrote `But Cut the Cards'.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
