manage to point one NAS to this radius... turn on the debug mode (-sfxxyz)... and below is the portion where the problem start ..... FYI.. during this rlm_ldap problem.. using ldapsearch should yield the result... So no problem on LDAP site...
........... rlm_ldap: performing search in ou=People,dc=jaring,dc=my, with filter (uid=spts) rlm_ldap: checking if remote access for spts is allowed by dialupAccess rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: Adding radiusSessionTimeout as Session-Timeout, value 21600 & op=11 rlm_ldap: Adding radiusFramedCompression as Framed-Compression, value Van-Jacobson-TCP-IP & op=11 rlm_ldap: Adding radiusFramedMTU as Framed-MTU, value 1500 & op=11 rlm_ldap: Adding radiusFramedProtocol as Framed-Protocol, value PPP & op=11 rlm_ldap: Adding radiusServiceType as Service-Type, value Framed-User & op=11 rlm_ldap: user spts authorized to use remote access ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap1" returns ok for request 561 modcall: group redundant returns ok for request 561 modcall: group authorize returns ok for request 561 rad_check_password: Found Auth-Type LDAP auth: type "LDAP" modcall: entering group Auth-Type for request 561 modcall: entering group redundant for request 561 rlm_ldap: - authenticate rlm_ldap: login attempt by "spts" with password "XXXX" rlm_ldap: user DN: uniqueIdentifier=687130,ou=RADIUS,ou=People,dc=jaring,dc=my rlm_ldap: (re)connect to 61.6.32.201:389, authentication 1 rlm_ldap: bind as uniqueIdentifier=687130,ou=RADIUS,ou=People,dc=jaring,dc=my/spts2003 to 61.6.32 .201:389 rlm_ldap: waiting for bind result ... rlm_ldap: ldap_result() rlm_ldap: uniqueIdentifier=687130,ou=RADIUS,ou=People,dc=jaring,dc=my bind to 61.6.32.201:389 fai led: timeout rlm_ldap: ldap_connect() failed modcall[authenticate]: module "ldap1" returns fail for request 561 rlm_ldap: - authenticate rlm_ldap: login attempt by "spts" with password "XXXX" rlm_ldap: user DN: uniqueIdentifier=687130,ou=RADIUS,ou=People,dc=jaring,dc=my rlm_ldap: (re)connect to 61.6.32.97:389, authentication 1 rlm_ldap: bind as uniqueIdentifier=687130,ou=RADIUS,ou=People,dc=jaring,dc=my/spts2003 to 61.6.32 .97:389 rlm_ldap: waiting for bind result ... rlm_ldap: ldap_result() rlm_ldap: uniqueIdentifier=687130,ou=RADIUS,ou=People,dc=jaring,dc=my bind to 61.6.32.97:389 fail ed: timeout rlm_ldap: ldap_connect() failed modcall[authenticate]: module "ldap2" returns fail for request 561 modcall: group redundant returns fail for request 561 modcall: group Auth-Type returns fail for request 561 auth: Failed to validate the user. Login incorrect: [spts] (from client jhb34 port 239 cli 072270533) Delaying request 561 for 1 seconds Finished request 561 Going to the next request ................. --haizam ----- Original Message ----- From: "Rohaizam Abu Bakar" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, October 21, 2003 12:44 PM Subject: Re: core dump using freeradius0.9.2 with FreeBSD 5.1 > > Can't find the core although it say in log > > Oct 20 16:42:20 radius3 kernel: pid 67341 (radiusd), uid 0: exited on > signal 4 (core dumped) > > Mon Oct 20 11:41:50 2003 : Error: rlm_ldap: > uniqueIdentifier=208173,ou=RADIUS,ou=People,dc=com > ,dc=my bind to x.x.x.x:389 failed: timeout > > > When runnning FB 5.1 with 0.9.2, at first it will running OK .. then around > 15 minutes it will die & BOTH error log appear... > > Then when i switch to 0.9.0 ... no "core" error but only "rlm_ldap" > error.... > > Currently no authentication is forwarded to above server... I've reverted > to my FB 4.8 with 0.9.2 that running fine... > > What should i do without the CORE?? > > --haizam > > > > ----- Original Message ----- > From: "Kostas Kalevras" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, October 20, 2003 8:43 PM > Subject: Re: core dump using freeradius0.9.2 with FreeBSD 5.1 > > > > On Mon, 20 Oct 2003, Rohaizam Abu Bakar wrote: > > > > > even 0.9.0 having problem with FreeBSD 5.1 ... something about rlm_ldap > .... > > > > Please read doc/bugs and send a backtrace of the core dump to the list. > > > > Thanks > > > > > > > > --haizam > > > > > > ----- Original Message ----- > > > From: Rohaizam Abu Bakar > > > To: [EMAIL PROTECTED] > > > Sent: Monday, October 20, 2003 6:53 PM > > > Subject: core dump using freeradius0.9.2 with FreeBSD 5.1 > > > > > > > > > > > > Using freeradius 0.9.2 with FreeBSD 5.1.. All compilations seems Ok... > even starting up doesn't give any problem... But once pumping load into it > (not that heavy)... then it keep core dumping as shown in below log.. > > > > > > Currently i revert back to freeradius 0.9.0 with my FreeBSD 5.1 ... > > > > > > FYI... freeradius 0.9.2 inside my FreeBSD 4.8 runnning fine... > > > > > > > > > LOG > > > ===== > > > i) from system log > > > > > > Oct 20 16:42:20 radius3 kernel: pid 67341 (radiusd), uid 0: exited on > > > signal 4 (core dumped) > > > Oct 20 16:42:20 radius3 kernel: Oct 20 16:42:20 radius3 kernel: pid > 67341 > > > (radiusd), uid 0: exited on signal 4 (core dumped) > > > Oct 20 17:02:02 radius3 kernel: pid 68054 (radiusd), uid 0: exited on > > > signal 4 (core dumped) > > > Oct 20 17:02:02 radius3 kernel: Oct 20 17:02:02 radius3 kernel: pid > 68054 > > > (radiusd), uid 0: exited on signal 4 (core dumped) > > > Oct 20 17:34:01 radius3 kernel: pid 69185 (radiusd), uid 0: exited on > > > signal 4 (core dumped) > > > Oct 20 17:34:01 radius3 kernel: Oct 20 17:34:01 radius3 kernel: pid > 69185 > > > (radiusd), uid 0: exited on signal 4 (core dumped) > > > Oct 20 17:46:27 radius3 kernel: pid 69671 (radiusd), uid 0: exited on > > > signal 4 (core dumped) > > > Oct 20 17:46:27 radius3 kernel: Oct 20 17:46:27 radius3 kernel: pid > 69671 > > > (radiusd), uid 0: exited on signal 4 (core dumped) > > > > > > ii) from radius.log > > > > > > Mon Oct 20 18:37:00 2003 : Error: rlm_ldap: > uniqueIdentifier=227523,ou=RADIUS,ou=People,dc=com,dc=my bind to x.x.x.x:389 > failed: timeout > > > Mon Oct 20 18:37:00 2003 : Error: rlm_ldap: > uniqueIdentifier=717710,ou=RADIUS,ou=People,dc=com,dc=my bind to x.x.x.x:389 > failed: timeout > > > Mon Oct 20 18:37:03 2003 : Error: rlm_ldap: > uniqueIdentifier=983053,ou=RADIUS,ou=People,dc=com,dc=my bind to x.x.x.x:389 > failed: timeout > > > > > > > > > --haizam > > > > > > > -- > > Kostas Kalevras Network Operations Center > > [EMAIL PROTECTED] National Technical University of Athens, Greece > > Work Phone: +30 210 7721861 > > 'Go back to the shadow' Gandalf > > > > - > > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > [ Scanned by JARING E-Mail Virus Scanner ( http://www.jaring.my ) ] > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
