You forgot to mention how your radius server is configured, using the system password file, sql, LDAP?
Either way though, as a general solution you should be able to separate the two by adding NAS-Port and group as check conditions to the users file. You'll need one for each interface. http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/secur _c/scprt2/scrad.htm#xtocid182648 See also the cisco doc that comes with freeradius. > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Anastasios > Sotiropoulos > Sent: 21 October 2003 01:49 > To: [EMAIL PROTECTED] > Subject: Authentication based on interface? > > > > I have a cicso 3600 with 2 physical interfaces (2 ISDN PRIs) and want > to make 2 usergroups with separate access to them (ex. group1 can login > only from Serial0/0, and group2 -> Serial1/0). How could that be done? > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html ------------------------------------------------------------------------------------------------------- This email, and any files transmitted with it, is copyright and may contain confidential information. The contents are intended for the use of the addressee(s) only. Unauthorized use may be unlawful. If you receive this email by mistake, please advise sender immediately. The views of the author may not necessarily constitute the views of Telco Electronics Limited. Nothing in this mail shall bind Telco Electronics Limited in any contract or obligation. Telco Electronics Limited 6-8 Oxford Court Brackley Northants NN13 7XY Tel 07000 701999 Fax 07000 701777 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
