Here's the line of code, type 25 is PEAP, but no handler ....
if (eaptype_call(inst->types[eaptype->type],
handler) == 0) {
DEBUG2(" rlm_eap: Handler failed in EAP type %d",
eaptype->type);
return EAP_INVALID;
}
> -----Original Message-----
> From: Ron Wahler
> Sent: Friday, October 24, 2003 10:23 AM
> To: [EMAIL PROTECTED]
> Subject: RE: Peap Testing problem
>
>
> I am testing with Windows XP/peap, through a Cisco 350 AP to
FreeRadius.
>
> Ron.
>
> > -----Original Message-----
> > From: Ron Wahler
> > Sent: Friday, October 24, 2003 10:20 AM
> > To: [EMAIL PROTECTED]
> > Subject: RE: Peap Testing problem
> >
> > Ok, I had a bad config, I fixed that. So here is the debug for PEAP.
> >
> > Still failing on
> >
> > Fri Oct 24 08:33:52 2003 : Debug: rlm_eap_peap: Tunneled data is
> > valid.
> > Fri Oct 24 08:33:52 2003 : Debug: rlm_eap: Handler failed in EAP
type
> > 25
> > Fri Oct 24 08:33:52 2003 : Debug: rlm_eap: Failed in EAP select
> >
> >
> > Ron.
> >
> >
> >
> >
> >
> > The debug out put -Xxxx
> >
> >
> > Fri Oct 24 08:33:52 2003 : Debug: auth: type "EAP"
> > Fri Oct 24 08:33:52 2003 : Debug: modcall: entering group
authenticate
> > for request 1
> > 8
> > Fri Oct 24 08:33:52 2003 : Debug: modsingle[authenticate]: calling
> eap
> > (rlm_eap) f
> > or request 18
> > Fri Oct 24 08:33:52 2003 : Debug: rlm_eap: Request found, released
> > from the list
> > Fri Oct 24 08:33:52 2003 : Debug: rlm_eap: EAP_TYPE - peap
> > Fri Oct 24 08:33:52 2003 : Debug: rlm_eap: processing type peap
> > Fri Oct 24 08:33:52 2003 : Debug: rlm_eap_peap: Authenticate
> > Fri Oct 24 08:33:52 2003 : Debug: rlm_eap_tls: processing TLS
> > Fri Oct 24 08:33:52 2003 : Debug: eaptls_verify returned 7
> > Fri Oct 24 08:33:52 2003 : Debug: rlm_eap_tls: Done initial
> handshake
> > Fri Oct 24 08:33:52 2003 : Debug: eaptls_process returned 7
> > Fri Oct 24 08:33:52 2003 : Debug: rlm_eap_peap: EAPTLS_OK
> > Fri Oct 24 08:33:52 2003 : Debug: rlm_eap_peap: Session
established.
> > Proceeding t
> > o decode tunneled attributes.
> > PEAP tunnel data in 0000: 02 19 00 0b 21 80 03 00 02 00 02
> > Fri Oct 24 08:33:52 2003 : Debug: rlm_eap_peap: Received EAP-TLV
> > response.
> > Fri Oct 24 08:33:52 2003 : Debug: rlm_eap_peap: Tunneled data is
> > valid.
> > Fri Oct 24 08:33:52 2003 : Debug: rlm_eap: Handler failed in EAP
type
> > 25
> > Fri Oct 24 08:33:52 2003 : Debug: rlm_eap: Failed in EAP select
> > Fri Oct 24 08:33:52 2003 : Debug: modsingle[authenticate]:
returned
> > from eap (rlm_
> > eap) for request 18
> > Fri Oct 24 08:33:52 2003 : Debug: modcall[authenticate]: module
> "eap"
> > returns inva
> > lid for request 18
> > Fri Oct 24 08:33:52 2003 : Debug: modcall: group authenticate
returns
> > invalid for re
> > quest 18
> > Fri Oct 24 08:33:52 2003 : Debug: auth: Failed to validate the user.
> > Fri Oct 24 08:33:52 2003 : Debug: Delaying request 18 for 1 seconds
> > Fri Oct 24 08:33:52 2003 : Debug: Finished request 18
> > Fri Oct 24 08:33:52 2003 : Debug: Going to the next request
> > Fri Oct 24 08:33:52 2003 : Debug: Waking up in 5 seconds...
> > rad_recv: Access-Request packet from host 10.0.0.57:1146, id=107,
> > length=202
> > Sending Access-Reject of id 107 to 10.0.0.57:1146
> > EAP-Message = 0x04190004
> > Message-Authenticator = 0x00000000000000000000000000000000
> > Fri Oct 24 08:33:57 2003 : Debug: --- Walking the entire request
list
> > ---
> > Fri Oct 24 08:33:57 2003 : Debug: Cleaning up request 10 ID 99 with
> > timestamp 3f9938
> >
> >
> >
> >
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
