> From: Alan Litster
> Sent: Friday, 24 October 2003 2:22 AM
> 17:12:00.585697 1.2.3.82.6025 > 1.2.3.66.1812: rad-access-req 128 [id 13]
> Attr[ NAS_ipaddr{192.168.0.38} User{8703405063} NAS_port_type{Async}
> [|radius] (DF)
> 0x0000 4500 009c 9242 4000 4011 d059 5190 9a52 [EMAIL PROTECTED]@..YQ..R
> 0x0010 5190 9a42 1789 0714 0088 4881 010d 007a Q..B......H....z
> 0x0020 474e f6d4 a092 e1b3 b516 c6d5 56c7 abe0 GN..........V...
> 0x0030 0406 c0a8 0026 010c 3837 3033 3430 3530 .....&..87034050
> 0x0040 3633 3d06 0000 0000 1f1f 7369 703a 3837 63=.......sip:87
> 0x0050 3033 03
> 17:12:01.580525 1.2.3.82.6025 > 1.2.3.66.1812: rad-access-req 128 [id 13]
> Attr[ NAS_ipaddr{192.168.0.38} User{8703405063} NAS_port_type{Async}
> [|radius] (DF)
> 0x0000 4500 009c 9255 4000 4011 d046 5190 9a52 [EMAIL PROTECTED]@..FQ..R
> 0x0010 5190 9a42 1789 0714 0088 4881 010d 007a Q..B......H....z
> 0x0020 474e f6d4 a092 e1b3 b516 c6d5 56c7 abe0 GN..........V...
> 0x0030 0406 c0a8 0026 010c 3837 3033 3430 3530 .....&..87034050
> 0x0040 3633 3d06 0000 0000 1f1f 7369 703a 3837 63=.......sip:87
> 0x0050 3033 03
>
> Above is the output from tcpdump as requested, I'm not quite sure why
> NAS_ipaddr is reported as 192.168.0.38 - we don't use that address.
You need to add '-s 0' to your tcpdump command. By default, tcpdump
only gets 52 bytes, which is enough to identify the payload of the packet
generally. '-s 0' collects the entire packet.
--
Paul "TBBle" Hampson
Bubblesworth Pty Ltd (ABN: 51 095 284 361)
[EMAIL PROTECTED]
On a sidewalk near Portland State
University someone wrote `Trust Jesus', and
someone else wrote `But Cut the Cards'.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
