On Tue, 28 Oct 2003, Jean-Paul Chapalain wrote:
> I 've tried with "Fall-Through = no" but it's the same thing.
>
> You can read in the 5.2 question in FAQ, "It doesn't
> need a Fall-Through" !!!
>
I guess not. Sorry, was hoping that was an easy one, seemed like it
needed it since its finding the reject at 3 and then continuing on with
ldap authentication at 6.
What happens if you switch the order of NAS-IP and Auth-Type?
a0153 NAS-IP-Address == 10.154.100.15, Auth-Type := Reject
> I used FreeRadius in version 0.9.1.
>
> See below the new users's file :
> #---------------------------------------------------------
> # No VPN-Nas Access
> a0153 Auth-Type := Reject, NAS-IP-Address == 10.154.100.15
> Reply-Message = "No VPN Access for you",
> Fall-Through = no
>
> a0153 Auth-Type := LDAP
> Service-Type = NAS-Prompt-User,
> cisco-avpair = "shell:idletime=10",
> Idle-Timeout = 600,
> Reply-Message = "Hello !"
>
>
> #=========================================================
> # Default Authentication
> #=========================================================
>
> # Reject all
> #---------------------------------------------------------
> DEFAULT Auth-Type := Reject
> Reply-Message = "Authentification failed (Warning ! Authorized
> Users only !)"
>
>
> JP,
> Thank,
>
> > On Mon, 27 Oct 2003, Jean-Paul Chapalain wrote:
> >
> >> Hi,
> >>
> >> I want reject a user only on a particular Nas.
> >> This have to connect on other Nas.
> >>
> >> So i code user's file with a entry Auth-Type := Reject.
> >> In spite of this, the user continue to be accept on this Nas (@ip :
> >> 10.154.100.15).
> >>
> >> Two entry (line 3 and line 5) of users file is matched !!!
> >>
> >> Thank for your help.
> >>
> >> ++++ See below users's file :
> >> #
> >> # No VPN-Nas Access
> >> a0153 Auth-Type := Reject, NAS-IP-Address == 10.154.100.15
> >> Reply-Message = "No VPN Access for you"
> >
> > add
> > Fall-Through = no
> >
> >
> >>
> >> a0153 Auth-Type := LDAP
> >> Service-Type = NAS-Prompt-User,
> >> cisco-avpair = "shell:idletime=10",
> >> Idle-Timeout = 600,
> >> Reply-Message = "Hello !"
> >>
> >> ++++ See below radiusd's log :
> >> Starting - reading configuration files ...
> >> reread_config: reading radiusd.conf
> >> Config: including file: /opt/freeradius/etc/raddb/proxy.conf
> >> Config: including file: /opt/freeradius/etc/raddb/clients.conf
> >> Config: including file: /opt/freeradius/etc/raddb/snmp.conf
> >> Config: including file: /opt/freeradius/etc/raddb/sql.conf
> >> main: prefix = "/opt/freeradius"
> >> main: localstatedir = "/opt/freeradius/var"
> >> main: logdir = "/opt/freeradius/var/log/radius"
> >> main: libdir = "/opt/freeradius/lib"
> >> main: radacctdir = "/opt/freeradius/var/log/radius/radacct"
> >> main: hostname_lookups = no
> >> main: max_request_time = 30
> >> main: cleanup_delay = 5
> >> main: max_requests = 1024
> >> main: delete_blocked_requests = 0
> >> main: port = 1812
> >> main: allow_core_dumps = no
> >> main: log_stripped_names = yes
> >> main: log_file = "/opt/freeradius/var/log/radius/radius.log"
> >> main: log_auth = yes
> >> main: log_auth_badpass = no
> >> main: log_auth_goodpass = no
> >> main: pidfile = "/opt/freeradius/var/run/radiusd/radiusd.pid"
> >> main: user = "radiusd"
> >> main: group = "radiusd"
> >> main: usercollide = yes
> >> main: lower_user = "no"
> >> main: lower_pass = "no"
> >> main: nospace_user = "no"
> >> main: nospace_pass = "no"
> >> main: checkrad = "/opt/freeradius/sbin/checkrad"
> >> main: proxy_requests = yes
> >> proxy: retry_delay = 5
> >> proxy: retry_count = 3
> >> proxy: synchronous = no
> >> proxy: default_fallback = yes
> >> proxy: dead_time = 120
> >> proxy: post_proxy_authorize = yes
> >> proxy: wake_all_if_all_dead = no
> >> security: max_attributes = 200
> >> security: reject_delay = 1
> >> security: status_server = no
> >> main: debug_level = 0
> >> read_config_files: reading dictionary
> >> read_config_files: reading naslist
> >> Using deprecated naslist file. Support for this will go away soon.
> >> read_config_files: reading clients
> >> Using deprecated clients file. Support for this will go away soon.
> >> read_config_files: reading realms
> >> Using deprecated realms file. Support for this will go away soon.
> >> radiusd: entering modules setup
> >> Module: Library search path is /opt/freeradius/lib
> >> Module: Loaded LDAP
> >> ldap: server = "10.154.32.1"
> >> ldap: port = 3268
> >> ldap: net_timeout = 1
> >> ldap: timeout = 4
> >> ldap: timelimit = 3
> >> ldap: identity = ""
> >> ldap: start_tls = no
> >> ldap: password = ""
> >> ldap: basedn = "dc=platine,dc=org"
> >> ldap: filter = "(cn=%u)"
> >> ldap: default_profile = "(null)"
> >> ldap: profile_attribute = "(null)"
> >> ldap: password_header = "(null)"
> >> ldap: password_attribute = "(null)"
> >> ldap: access_attr = "dialupAccess"
> >> ldap: groupname_attribute = "cn"
> >> ldap: groupmembership_filter =
> >> "(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
> >> ldap: groupmembership_attribute = "(null)"
> >> ldap: dictionary_mapping = "/opt/freeradius/etc/raddb/ldap.attrmap"
> >> ldap: ldap_debug = 0
> >> ldap: ldap_connections_number = 5
> >> ldap: compare_check_items = no
> >> ldap: access_attr_used_for_allow = yes
> >> conns: (nil)
> >> rlm_ldap: reading ldap<->radius mappings from file
> >> /opt/freeradius/etc/raddb/ldap.attrmap
> >> rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
> >> rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
> >> rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
> >> rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
> >> rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
> >> rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
> >> rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
> >> rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
> >> rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
> >> rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
> >> rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
> >> rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
> >> rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
> >> rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
> >> rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
> >> rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
> >> rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
> >> rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
> >> rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
> >> rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
> >> rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
> >> rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
> >> rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
> >> rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
> >> rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
> >> rlm_ldap: LDAP radiusClass mapped to RADIUS Class
> >> rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
> >> rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
> >> rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
> >> rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
> >> rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
> >> rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
> >> rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS
> >> Framed-AppleTalk-Link
> >> rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
> >> Framed-AppleTalk-Network
> >> rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS
> >> Framed-AppleTalk-Zone
> >> rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
> >> rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
> >> conns: 0x811da88
> >> Module: Instantiated ldap (ldap)
> >> Module: Loaded preprocess
> >> preprocess: huntgroups = "/opt/freeradius/etc/raddb/huntgroups"
> >> preprocess: hints = "/opt/freeradius/etc/raddb/hints"
> >> preprocess: with_ascend_hack = no
> >> preprocess: ascend_channels_per_line = 23
> >> preprocess: with_ntdomain_hack = no
> >> preprocess: with_specialix_jetstream_hack = no
> >> preprocess: with_cisco_vsa_hack = no
> >> Module: Instantiated preprocess (preprocess)
> >> Module: Loaded realm
> >> realm: format = "suffix"
> >> realm: delimiter = "@"
> >> Module: Instantiated realm (suffix)
> >> Module: Loaded files
> >> files: usersfile = "/opt/freeradius/etc/raddb/users"
> >> files: acctusersfile = "/opt/freeradius/etc/raddb/acct_users"
> >> files: preproxy_usersfile = "/opt/freeradius/etc/raddb/preproxy_users"
> >> files: compat = "no"
> >> Module: Instantiated files (files)
> >> Module: Loaded detail
> >> detail: detailfile =
> >> "/opt/freeradius/var/log/radius/radacct/%{Client-IP-Address}/detail"
> >> detail: detailperm = 384
> >> detail: dirperm = 493
> >> detail: locking = no
> >> Module: Instantiated detail (detail)
> >> Module: Loaded radutmp
> >> radutmp: filename = "/opt/freeradius/var/log/radius/radutmp"
> >> radutmp: username = "%{User-Name}"
> >> radutmp: case_sensitive = yes
> >> radutmp: check_with_nas = yes
> >> radutmp: perm = 384
> >> radutmp: callerid = yes
> >> Module: Instantiated radutmp (radutmp)
> >> Listening on IP address *, ports 1812/udp and 1813/udp, with proxy on
> >> 1814/udp.
> >> Ready to process requests.
> >> rad_recv: Access-Request packet from host 10.154.100.15:21646, id=39,
> >> length=88
> >> User-Name = "a0153"
> >> Reply-Message = "Password: "
> >> User-Password = "XXXXXXXX"
> >> NAS-Port = 66
> >> NAS-Port-Type = Virtual
> >> Calling-Station-Id = "10.154.99.1"
> >> NAS-IP-Address = 10.154.100.15
> >> modcall: entering group authorize
> >> modcall[authorize]: module "preprocess" returns ok
> >> rlm_realm: No '@' in User-Name = "a0153", looking up realm NULL
> >> rlm_realm: No such realm "NULL"
> >> modcall[authorize]: module "suffix" returns noop
> >> users: Checking a0153 at 3
> >> rad_check_password: Found Auth-Type Reject
> >> rad_check_password: Auth-Type = Reject, rejecting user
> >> users: Checking a0153 at 6
> >> rad_check_password: Found Auth-Type LDAP
> >> auth: type "LDAP"
> >> modcall: entering group authtype
> >> rlm_ldap: - authenticate
> >> rlm_ldap: login attempt by "a0153" with password "XXXXXXXX"
> >> radius_xlat: '(cn=a0153)'
> >> radius_xlat: 'dc=platine,dc=org'
> >> ldap_get_conn: Got Id: 0
> >> rlm_ldap: attempting LDAP reconnection
> >> rlm_ldap: (re)connect to 10.154.32.1:3268, authentication 0
> >> rlm_ldap: bind as / to 10.154.32.1:3268
> >> rlm_ldap: waiting for bind result ...
> >> rlm_ldap: performing search in dc=platine,dc=org, with filter (cn=a0153)
> >> ldap_release_conn: Release Id: 0
> >> rlm_ldap: user DN: CN=A0153,OU=Users,DC=corporate,DC=platine,DC=org
> >> rlm_ldap: (re)connect to 10.154.32.1:3268, authentication 1
> >> rlm_ldap: bind as
> >> CN=A0153,OU=Users,DC=corporate,DC=platine,DC=org/XXXXXXXX to
> >> 10.154.32.1:3268
> >> rlm_ldap: waiting for bind result ...
> >> rlm_ldap: user a0153 authenticated succesfully
> >> modcall[authenticate]: module "ldap" returns ok
> >> modcall: group authtype returns ok
> >> users: Matched a0153 at 6
> >> modcall[authorize]: module "files" returns ok
> >> modcall: group authorize returns ok
> >> rad_check_password: Found Auth-Type LDAP
> >> auth: type "LDAP"
> >> modcall: entering group authtype
> >> rlm_ldap: - authenticate
> >> rlm_ldap: login attempt by "a0153" with password "XXXXXXXX"
> >> rlm_ldap: user DN: CN=A0153,OU=Users,DC=corporate,DC=platine,DC=org
> >> rlm_ldap: (re)connect to 10.154.32.1:3268, authentication 1
> >> rlm_ldap: bind as
> >> CN=A0153,OU=Users,DC=corporate,DC=platine,DC=org/XXXXXXXX to
> >> 10.154.32.1:3268
> >> rlm_ldap: waiting for bind result ...
> >> rlm_ldap: user a0153 authenticated succesfully
> >> modcall[authenticate]: module "ldap" returns ok
> >> modcall: group authtype returns ok
> >> radius_xlat: 'Hello !'
> >> Login OK: [a0153] (from client r-vpn-b.rtr.corporate.net port 66 cli
> >> 10.154.99.1)
> >> Sending Access-Accept of id 39 to 10.154.100.15:21646
> >> Service-Type = NAS-Prompt-User
> >> Cisco-AVPair = "shell:idletime=10"
> >> Idle-Timeout = 600
> >> Reply-Message = "Hello !"
> >> Finished request 0
> >> Going to the next request
> >> --- Walking the entire request list ---
> >> Waking up in 6 seconds...
> >> rad_recv: Accounting-Request packet from host 10.154.100.15:21646,
> >> id=40, length=92
> >> Acct-Session-Id = "00000055"
> >> Acct-Authentic = RADIUS
> >> User-Name = "a0153"
> >> Acct-Status-Type = Start
> >> NAS-Port = 66
> >> NAS-Port-Type = Virtual
> >> Calling-Station-Id = "10.154.99.1"
> >> Service-Type = NAS-Prompt-User
> >> NAS-IP-Address = 10.154.100.15
> >> Acct-Delay-Time = 0
> >> modcall: entering group preacct
> >> modcall[preacct]: module "preprocess" returns noop
> >> rlm_realm: No '@' in User-Name = "a0153", looking up realm NULL
> >> rlm_realm: No such realm "NULL"
> >> modcall[preacct]: module "suffix" returns noop
> >> modcall[preacct]: module "files" returns noop
> >> modcall: group preacct returns noop
> >> modcall: entering group accounting
> >> radius_xlat: '/opt/freeradius/var/log/radius/radacct/10.154.100.15/detail'
> >> rlm_detail:
> >> /opt/freeradius/var/log/radius/radacct/%{Client-IP-Address}/detail
> >> expands to /opt/freeradius/var/log/radius/radacct/10.154.100.15/detail
> >> modcall[accounting]: module "detail" returns ok
> >> radius_xlat: '/opt/freeradius/var/log/radius/radutmp'
> >> radius_xlat: 'a0153'
> >> modcall[accounting]: module "radutmp" returns ok
> >> modcall: group accounting returns ok
> >> Sending Accounting-Response of id 40 to 10.154.100.15:21646
> >> Finished request 1
> >> Going to the next request
> >> Waking up in 6 seconds...
> >>
>
>
>
> --
> -- Jean-Paul Chapalain - GICM - Reseaux et Systemes Distribues
> -- 32 rue Mirabeau - Le Relecq-Kerhuon - 29808 Brest Cedex 9, FRANCE
> -- Tel +33298002873 - Fax +33298284005 - [EMAIL PROTECTED]
> -- Key Fingerprint: 192C 1CFE F24A 050D F280 A086 AF15 8631 3ABB 4C7D
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
