We use A&A with build 1024 with no problem with or with out Server certificate validation.
> -----Original Message----- > From: Damjan [mailto:[EMAIL PROTECTED] > Sent: Tuesday, November 04, 2003 1:40 PM > To: [EMAIL PROTECTED] > Subject: Re: Working radiusd.conf for TTLS - Alfa & Ariss client setup? > > > > I have seen this asked a few times in the group but no one seemed to > be > > > able to post a radiusd.conf that works form him/her in a TTLS with > > > Alfa & Ariss client setup, so I thought I'd ask again ;) > > > > I think I've used it with the A&A client, but I don't recall for > > sure. I do recall that one of the clients I tested crashed when using > > TTLS, which was unfortunate. > > I've used the Alfa & Ariss client with freeradius-snapshot-20031029 and > there were no problems at all. > > Also there is nothing special about my radiusd.conf setup except that I > made a self signed certificate without a password: > tls { > # private_key_password = > private_key_file = /etc/1x/wifi.pem > certificate_file = /etc/1x/wifi.pem > CA_file = /etc/1x/wifi.pem > ... > > But I've also disabled checking the server certificate in the client, > for the initial testing (and I didn't have time to test since then) > > The client was authenticated with a user name and password from the > "/etc/raddb/users" file. > > > > -- > Damjan Georgievski > jabberID: [EMAIL PROTECTED] > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
