hi,
everybody,i am sorry that my english is very pool.i got some trouble
with cisco pix525 and freeradius.the relation configuration of pix525 is
blow list:
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server authout protocol radius
aaa-server nm protocol radius
aaa-server nm (inside) host 10.61.16.71 l2tp timeout 10
And my radius server is redhat 9.0 with freeradius 0.9.3.I install it by
"./configure,make,make install",it seems all ok.Then i changed some files
to adapt my environment.
at last,i saw the information of radius server:
rad_recv: Access-Request packet from host 10.61.114.253:1645, id=85,
length=162
User-Name = "jiang"
NAS-IP-Address = 10.61.114.253
Calling-Station-Id = "0.0.0.0"
MS-CHAP-Challenge = 0x1e1c9a5f64ed06d9
MS-CHAP-Response =
0x0101000000000000000000000000000000000000000000000000ab2d88181066a1082fec333d07d2e4b51d5f85717f57da28
Service-Type = Framed-User
Framed-Protocol = PPP
NAS-Port = 5
Cisco-AVPair = "ip:source-ip=0.0.0.0"
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "eap" returns noop for request 0
rlm_realm: No '@' in User-Name = "jiang", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
users: Matched DEFAULT at 152
users: Matched DEFAULT at 171
users: Matched DEFAULT at 183
modcall[authorize]: module "files" returns ok for request 0
rlm_mschap: Found MS-CHAP attributes. Setting 'Auth-Type := MS-CHAP'
modcall[authorize]: module "mschap" returns ok for request 0
modcall: group authorize returns ok for request 0
rad_check_password: Found Auth-Type MS-CHAP
auth: type "MS-CHAP"
modcall: entering group Auth-Type for request 0
rlm_mschap: No User-Password configured. Cannot create LM-Password.
rlm_mschap: No User-Password configured. Cannot create NT-Password.
rlm_mschap: No LM-Password or NT-Password attribute found. Cannot
perform MS-CHAP authentication.
modcall[authenticate]: module "mschap" returns fail for request 0
modcall: group Auth-Type returns fail for request 0
auth: Failed to validate the user.
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 85 to 10.61.114.253:1645
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 85 with timestamp 3fc415a6
Nothing to do. Sleeping until we see a request.
anybody can help me ?thanks a lot.
_________________________________________________________________
与联机的朋友进行交流，请使用 MSN Messenger: http://messenger.msn.com/cn
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
