> -----Original Message-----
> From: 3APA3A [mailto:[EMAIL PROTECTED] 
> Sent: Tuesday, December 02, 2003 5:27 AM
> To: Eliot Gable
> Subject: Re: MS-CHAPv2 + MySQL + group authtype failure
> 
> Dear Eliot Gable,
> 
> Make  sure  shared  secret  configured  for  NAS and password entered
by
> client are valid. Check cleartext and MS-CHAP (v1) authentication.
                    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This almost works. The server responds with an accept packet, but the
NAS does not like the response and sends the client a reject packet.
What I am seeing is two separate(?) errors on the NAS (a roamnode that
Josh Howlett designed; output at the bottom)...

<snip>
WARNING: Malformed RADIUS packet from host 208.244.163.17: Vendor
specific attributes do not exactly fill Vendor-Specific
<snip>
modcall: group authorize returns ok
auth: No authenticate method (Auth-Type) configuration found for the
request: Rejecting the user
auth: Failed to validate the user.
Delaying request 2 for 1 seconds
<snip>

My vendor specific tag is set in my SQL table:

mysql> select * from radgroupreply;
+----+-----------+-----------------+----+-------------------------+-----
-+
| id | GroupName | Attribute       | op | Value                   | prio
|
+----+-----------+-----------------+----+-------------------------+-----
-+
|  1 | 56/56     | Framed-MTU      | := | 1500                    |    0
|
|  2 | 56/56     | Service-Type    | := | Framed                  |    0
|
|  3 | 56/56     | Framed-Protocol | := | PPP                     |    0
|
|  4 | 56/56     | Vendor-Specific | := | homenode.greatlakes.net |    0
|
+----+-----------+-----------------+----+-------------------------+-----
-+  

Here is the output from the server (which looks good); the NAS output
follows this:

Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /admin/radius/raddb/proxy.conf
Config:   including file: /admin/radius/raddb/clients.conf
Config:   including file: /admin/radius/raddb/snmp.conf
Config:   including file: /admin/radius/raddb/sql.conf
 main: prefix = "/usr/local"
 main: localstatedir = "/admin/radius"
 main: logdir = "/admin/radius/log/radius"
 main: libdir = "/usr/local/lib"
 main: radacctdir = "/admin/radius/log/radius/radacct"
 main: hostname_lookups = no
 main: max_request_time = 30
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 1812
 main: allow_core_dumps = no
 main: log_stripped_names = no
 main: log_file = "/admin/radius/log/radius/radius.log"
 main: log_auth = no
 main: log_auth_badpass = yes
 main: log_auth_goodpass = no
 main: pidfile = "/admin/radius/run/radiusd/radiusd.pid"
 main: user = "nobody"
 main: group = "nobody"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/local/sbin/checkrad"
 main: proxy_requests = yes
 proxy: retry_delay = 5
 proxy: retry_count = 3
 proxy: synchronous = no
 proxy: default_fallback = yes
 proxy: dead_time = 120
 proxy: post_proxy_authorize = yes
 proxy: wake_all_if_all_dead = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
Using deprecated clients file.  Support for this will go away soon.
read_config_files:  reading realms
Using deprecated realms file.  Support for this will go away soon.
radiusd:  entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
 pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
 mschap: use_mppe = yes
 mschap: require_encryption = no
 mschap: require_strong = no
 mschap: passwd = "(null)"
 mschap: authtype = "MS-CHAP"
Module: Instantiated mschap (mschap)
Module: Loaded System
 unix: cache = no
 unix: passwd = "/etc/passwd"
 unix: shadow = "/etc/shadow"
 unix: group = "/etc/group"
 unix: radwtmp = "/admin/radius/log/radius/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
 eap: default_eap_type = "md5"
 eap: timer_expire = 60
rlm_eap: Loaded and initialized the type md5
Module: Instantiated eap (eap)
Module: Loaded preprocess
 preprocess: huntgroups = "/admin/radius/raddb/huntgroups"
 preprocess: hints = "/admin/radius/raddb/hints"
 preprocess: with_ascend_hack = no
 preprocess: ascend_channels_per_line = 23
 preprocess: with_ntdomain_hack = no
 preprocess: with_specialix_jetstream_hack = no
 preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
 realm: format = "suffix"
 realm: delimiter = "@"
Module: Instantiated realm (suffix)
Module: Loaded SQL
 sql: driver = "rlm_sql_mysql"
 sql: server = "localhost"
 sql: port = ""
 sql: login = "radius"
 sql: password = "Icet4all"
 sql: radius_db = "radius"
 sql: acct_table = "radacct"
 sql: acct_table2 = "radacct"
 sql: authcheck_table = "radcheck"
 sql: authreply_table = "radreply"
 sql: groupcheck_table = "radgroupcheck"
 sql: groupreply_table = "radgroupreply"
 sql: usergroup_table = "usergroup"
 sql: nas_table = "nas"
 sql: dict_table = "dictionary"
 sql: sqltrace = no
 sql: sqltracefile = "/admin/radius/log/radius/sqltrace.sql"
 sql: deletestalesessions = yes
 sql: num_sql_socks = 5
 sql: sql_user_name = "%{User-Name}"
 sql: default_user_profile = ""
 sql: query_on_not_found = no
 sql: authorize_check_query = "SELECT id,UserName,Attribute,Value,op
FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id"
 sql: authorize_reply_query = "SELECT id,UserName,Attribute,Value,op
FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id"
 sql: authorize_group_check_query = "SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgrou
pcheck.Value,radgroupcheck.op  FROM radgroupcheck,usergroup WHERE
usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName =
radgroupcheck.GroupName ORDER BY radgroupcheck.id"
 sql: authorize_group_reply_query = "SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrou
preply.Value,radgroupreply.op  FROM radgroupreply,usergroup WHERE
usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName =
radgroupreply.GroupName ORDER BY radgroupreply.id"
 sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S',
AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime),
AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay =
%{Acct-Delay-Time} WHERE AcctSessionTime=0 AND AcctStopTime=0 AND
NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
 sql: accounting_update_query = "UPDATE radacct SET FramedIPAddress =
'%{Framed-IP-Address}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND
UserName = '%{SQL-User-Name}' AND NASIPAddress= '%{NAS-IP-Address}' AND
AcctStopTime = 0"
 sql: accounting_start_query = "INSERT into radacct (RadAcctId,
AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId,
NASPortType, AcctStartTime,
 AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start,
ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId,
CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol,
FramedIPAddress, AcctStartDelay, AcctStopDelay) values('',
'%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}',
'%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}',
'0')"
 sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime =
'%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start =
'%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND
UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}' AND
AcctStopTime = 0"
 sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S',
AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets =
'%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}',
AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE
AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}'
AND NASIPAddress = '%{NAS-IP-Address}' AND AcctStopTime = 0"
 sql: accounting_stop_query_alt = "INSERT into radacct (RadAcctId,
AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId,
NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime,
AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets,
AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause,
ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay,
AcctStopDelay) values('', '%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
'%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '0', '%S',
'%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}',
'%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}',
'%{Framed-Protocol}',
 '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"
 sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE
UserName='%{SQL-User-Name}'"
 sql: connect_failure_retry_delay = 60
 sql: simul_count_query = ""
 sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName,
NASIPAddress, NASPortId, FramedIPAddress, CallingStationId,
FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND
AcctStopTime = 0"
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
linked
rlm_sql (sql): Attempting to connect to [EMAIL PROTECTED]:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
Module: Instantiated sql (sql)
Module: Loaded files
 files: usersfile = "/admin/radius/raddb/users"
 files: acctusersfile = "/admin/radius/raddb/acct_users"
 files: preproxy_usersfile = "/admin/radius/raddb/preproxy_users"
 files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
 acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port-Id"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
 detail: detailfile =
"/admin/radius/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
 radutmp: filename = "/admin/radius/log/radius/radutmp"
 radutmp: username = "%{User-Name}"
 radutmp: case_sensitive = yes
 radutmp: check_with_nas = yes
 radutmp: perm = 384
 radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on IP address *, ports 1812/udp and 1813/udp, with proxy on
1814/udp.
Ready to process requests.
rad_recv: Access-Request packet from host 208.244.163.28:1814, id=1,
length=138
        CHAP-Challenge =
"\035h\210\342\321\343\000vdu\331\336d]\322\2278\350"
        CHAP-Password = 0x0184381770d4852e0f8e034b22a10b66b1
        User-Name = "[EMAIL PROTECTED]"
        NAS-IP-Address = 208.244.163.28
        NAS-Identifier = "homenode.greatlakes.net"
        Service-Type = Framed-User
        Framed-Protocol = PPP
        Proxy-State = 0x3332
modcall: entering group authorize for request 0
  modcall[authorize]: module "preprocess" returns ok for request 0
  rlm_chap: Setting 'Auth-Type := CHAP'
  modcall[authorize]: module "chap" returns ok for request 0
  modcall[authorize]: module "mschap" returns noop for request 0
    rlm_realm: Looking up realm "homenode.greatlakes.net" for User-Name
= "[EMAIL PROTECTED]"
    rlm_realm: Found realm "homenode.greatlakes.net"
    rlm_realm: Adding Stripped-User-Name = "egable"
    rlm_realm: Proxying request from user egable to realm
homenode.greatlakes.net
    rlm_realm: Adding Realm = "homenode.greatlakes.net"
    rlm_realm: Authentication realm is LOCAL.
  modcall[authorize]: module "suffix" returns noop for request 0
radius_xlat:  '[EMAIL PROTECTED]'
rlm_sql (sql): sql_set_user escaped user -->
'[EMAIL PROTECTED]'
radius_xlat:  'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE
Username = '[EMAIL PROTECTED]' ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 4
radius_xlat:  'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgrou
pcheck.Value,radgroupcheck.op  FROM radgroupcheck,usergroup WHERE
usergroup.Username = '[EMAIL PROTECTED]' AND
usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat:  'SELECT id,UserName,Attribute,Value,op FROM radreply WHERE
Username = '[EMAIL PROTECTED]' ORDER BY id'
radius_xlat:  'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrou
preply.Value,radgroupreply.op  FROM radgroupreply,usergroup WHERE
usergroup.Username = '[EMAIL PROTECTED]' AND
usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 4
  modcall[authorize]: module "sql" returns ok for request 0
modcall: group authorize returns ok for request 0
  rad_check_password:  Found Auth-Type CHAP
auth: type "CHAP"
modcall: entering group authtype for request 0
  rlm_chap: login attempt by "egable" with CHAP password
  rlm_chap: Using clear text password testing for user egable
authentication.
  rlm_chap: chap user egable authenticated succesfully
  modcall[authenticate]: module "chap" returns ok for request 0
modcall: group authtype returns ok for request 0
Sending Access-Accept of id 1 to 208.244.163.28:1814
        Framed-IP-Address := 192.168.10.242
        Framed-MTU := 1500
        Service-Type := Framed-User
        Framed-Protocol := PPP
        Vendor-Specific :=
0x686f6d656e6f64652e67726561746c616b65732e6e6574
        Proxy-State = 0x3332
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 208.244.163.28:1814, id=1,
length=138
Sending duplicate reply to client homenode:1814 - ID: 1
Re-sending Access-Accept of id 1 to 208.244.163.28:1814
--- Walking the entire request list ---
Waking up in 2 seconds...
--- Walking the entire request list ---
Cleaning up request 0 ID 1 with timestamp 3fccce7f
Nothing to do.  Sleeping until we see a request.
rad_recv: Access-Request packet from host 208.244.163.28:1814, id=1,
length=138
        CHAP-Challenge =
"\035h\210\342\321\343\000vdu\331\336d]\322\2278\350"
        CHAP-Password = 0x0184381770d4852e0f8e034b22a10b66b1
        User-Name = "[EMAIL PROTECTED]"
        NAS-IP-Address = 208.244.163.28
        NAS-Identifier = "homenode.greatlakes.net"
        Service-Type = Framed-User
        Framed-Protocol = PPP
        Proxy-State = 0x3332
modcall: entering group authorize for request 2
  modcall[authorize]: module "preprocess" returns ok for request 2
  rlm_chap: Setting 'Auth-Type := CHAP'
  modcall[authorize]: module "chap" returns ok for request 2
  modcall[authorize]: module "mschap" returns noop for request 2
    rlm_realm: Looking up realm "homenode.greatlakes.net" for User-Name
= "[EMAIL PROTECTED]"
    rlm_realm: Found realm "homenode.greatlakes.net"
    rlm_realm: Adding Stripped-User-Name = "egable"
    rlm_realm: Proxying request from user egable to realm
homenode.greatlakes.net
    rlm_realm: Adding Realm = "homenode.greatlakes.net"
    rlm_realm: Authentication realm is LOCAL.
  modcall[authorize]: module "suffix" returns noop for request 2
radius_xlat:  '[EMAIL PROTECTED]'
rlm_sql (sql): sql_set_user escaped user -->
'[EMAIL PROTECTED]'
radius_xlat:  'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE
Username = '[EMAIL PROTECTED]' ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 3
radius_xlat:  'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgrou
pcheck.Value,radgroupcheck.op  FROM radgroupcheck,usergroup WHERE
usergroup.Username = '[EMAIL PROTECTED]' AND
usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat:  'SELECT id,UserName,Attribute,Value,op FROM radreply WHERE
Username = '[EMAIL PROTECTED]' ORDER BY id'
radius_xlat:  'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrou
preply.Value,radgroupreply.op  FROM radgroupreply,usergroup WHERE
usergroup.Username = '[EMAIL PROTECTED]' AND
usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 3
  modcall[authorize]: module "sql" returns ok for request 2
modcall: group authorize returns ok for request 2
  rad_check_password:  Found Auth-Type CHAP
auth: type "CHAP"
modcall: entering group authtype for request 2
  rlm_chap: login attempt by "egable" with CHAP password
  rlm_chap: Using clear text password testing for user egable
authentication.
  rlm_chap: chap user egable authenticated succesfully
  modcall[authenticate]: module "chap" returns ok for request 2
modcall: group authtype returns ok for request 2
Sending Access-Accept of id 1 to 208.244.163.28:1814
        Framed-IP-Address := 192.168.10.242
        Framed-MTU := 1500
        Service-Type := Framed-User
        Framed-Protocol := PPP
        Vendor-Specific :=
0x686f6d656e6f64652e67726561746c616b65732e6e6574
        Proxy-State = 0x3332
Finished request 2
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
--- Walking the entire request list ---
Cleaning up request 2 ID 1 with timestamp 3fccce86
Nothing to do.  Sleeping until we see a request.





Here is the output from the NAS:

Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /usr/local/radius//etc/raddb/proxy.conf
Config:   including file: /etc/raddb/realms.conf
Config:   including file: /usr/local/radius//etc/raddb/clients.conf
Config:   including file: /usr/local/radius//etc/raddb/snmp.conf
Config:   including file: /usr/local/radius//etc/raddb/sql.conf
 main: prefix = "/usr/local/radius/"
 main: localstatedir = "/usr/local/radius//var"
 main: logdir = "/usr/local/radius//var/log/radius"
 main: libdir = "/usr/local/radius//lib"
 main: radacctdir = "/usr/local/radius//var/log/radius/radacct"
 main: hostname_lookups = no
 main: max_request_time = 30
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 0
 main: allow_core_dumps = no
 main: log_stripped_names = no
 main: log_file = "/usr/local/radius//var/log/radius/radius.log"
 main: log_auth = no
 main: log_auth_badpass = no
 main: log_auth_goodpass = no
 main: pidfile = "/usr/local/radius//var/run/radiusd.pid"
 main: user = "root"
 main: group = "root"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/local/radius//sbin/checkrad"
 main: proxy_requests = yes
 proxy: retry_delay = 3
 proxy: retry_count = 3
 proxy: synchronous = no
 proxy: default_fallback = no
 proxy: dead_time = 600
 proxy: post_proxy_authorize = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/local/radius//lib
Module: Loaded preprocess
 preprocess: huntgroups = "/usr/local/radius//etc/raddb/huntgroups"
 preprocess: hints = "/usr/local/radius//etc/raddb/hints"
 preprocess: with_ascend_hack = no
 preprocess: ascend_channels_per_line = 23
 preprocess: with_ntdomain_hack = no
 preprocess: with_specialix_jetstream_hack = no
 preprocess: with_cisco_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded exec
 exec: wait = no
 exec: program = "/bin/add-temp-state.sh"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
Module: Instantiated exec (add-temp-state)
Module: Loaded realm
 realm: format = "suffix"
 realm: delimiter = "@"
Module: Instantiated realm (firstsuffix)
Module: Loaded files
 files: usersfile = "/usr/local/radius//etc/raddb/users"
 files: acctusersfile = "/usr/local/radius//etc/raddb/acct_users"
 files: preproxy_usersfile =
"/usr/local/radius//etc/raddb/preproxy_users"
 files: compat = "no"
Module: Instantiated files (files)
 exec: wait = yes
 exec: program = "/bin/tunnel-up %{User-Name}"
 exec: input_pairs = "proxy-reply"
 exec: output_pairs = "proxy-reply"
Module: Instantiated exec (proxy_auth_script)
Listening on IP address *, ports 1812/udp and 1813/udp, with proxy on
1814/udp.
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1:1025, id=32,
length=134
        CHAP-Challenge =
"\035h\210\342\321\343\000vdu\331\336d]\322\2278\350"
        CHAP-Password = 0x0184381770d4852e0f8e034b22a10b66b1
        User-Name = "[EMAIL PROTECTED]"
        NAS-IP-Address = 208.244.163.28
        NAS-Identifier = "homenode.greatlakes.net"
        Service-Type = Framed-User
        Framed-Protocol = PPP
modcall: entering group authorize
  modcall[authorize]: module "preprocess" returns ok
radius_xlat:  '/bin/add-temp-state.sh'
Exec-Program: /bin/add-temp-state.sh
  modcall[authorize]: module "add-temp-state" returns ok
    rlm_realm: Looking up realm "homenode.greatlakes.net" for User-Name
= "[EMAIL PROTECTED]"
    rlm_realm: Found realm "homenode.greatlakes.net"
    rlm_realm: Proxying request from user egable to realm
homenode.greatlakes.net
    rlm_realm: Adding Realm = "homenode.greatlakes.net"
    rlm_realm: Preparing to proxy authentication request to realm
"homenode.greatlakes.net"
  modcall[authorize]: module "firstsuffix" returns updated
    users: Matched DEFAULT at 171
    users: Matched DEFAULT at 184
  modcall[authorize]: module "files" returns ok
modcall: group authorize returns updated
Sending Access-Request of id 1 to 208.244.161.200:1812
        CHAP-Challenge =
"\035h\210\342\321\343\000vdu\331\336d]\322\2278\350"
        CHAP-Password = 0x0184381770d4852e0f8e034b22a10b66b1
        User-Name = "[EMAIL PROTECTED]"
        NAS-IP-Address = 208.244.163.28
        NAS-Identifier = "homenode.greatlakes.net"
        Service-Type = Framed-User
        Framed-Protocol = PPP
        Proxy-State = "32"
--- Walking the entire request list ---
Waking up in 4 seconds...
WARNING: Malformed RADIUS packet from host 208.244.163.17: Vendor
specific attributes do not exactly fill Vendor-Specific
rl_next:  returning NULL
Waking up in 4 seconds...
--- Walking the entire request list ---
Re-sending Access-Request of id 1 to 208.244.161.200:1812
        CHAP-Challenge =
"\035h\210\342\321\343\000vdu\331\336d]\322\2278\350"
        CHAP-Password = 0x0184381770d4852e0f8e034b22a10b66b1
        User-Name = "[EMAIL PROTECTED]"
        NAS-IP-Address = 208.244.163.28
        NAS-Identifier = "homenode.greatlakes.net"
        Service-Type = Framed-User
        Framed-Protocol = PPP
        Client-IP-Address = 127.0.0.1
        Realm = "homenode.greatlakes.net"
        Realm = "homenode.greatlakes.net"
        Proxy-State = "32"
Waking up in 3 seconds...
WARNING: Malformed RADIUS packet from host 208.244.163.17: Vendor
specific attributes do not exactly fill Vendor-Specific
rl_next:  returning NULL
Waking up in 3 seconds...
rad_recv: Access-Request packet from host 127.0.0.1:1025, id=32,
length=134
Dropping conflicting packet from client localhost:1025 - ID: 32 due to
unfinished request 0
--- Walking the entire request list ---
Waking up in 2 seconds...
--- Walking the entire request list ---
Re-sending Access-Request of id 1 to 208.244.161.200:1812
        CHAP-Challenge =
"\035h\210\342\321\343\000vdu\331\336d]\322\2278\350"
        CHAP-Password = 0x0184381770d4852e0f8e034b22a10b66b1
        User-Name = "[EMAIL PROTECTED]"
        NAS-IP-Address = 208.244.163.28
        NAS-Identifier = "homenode.greatlakes.net"
        Service-Type = Framed-User
        Framed-Protocol = PPP
        Client-IP-Address = 127.0.0.1
        Realm = "homenode.greatlakes.net"
        Realm = "homenode.greatlakes.net"
        Proxy-State = "32"
Waking up in 3 seconds...
WARNING: Malformed RADIUS packet from host 208.244.163.17: Vendor
specific attributes do not exactly fill Vendor-Specific
rl_next:  returning NULL
Waking up in 3 seconds...
--- Walking the entire request list ---
Server rejecting request 0.
marking authentication server 208.244.161.200:1812 for realm NULL dead
marking authentication server 208.244.161.200:1812 for realm
homenode.greatlakes.net dead
Waking up in 0 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 32 to 127.0.0.1:1025
Cleaning up request 0 ID 32 with timestamp 3fcc9964
Nothing to do.  Sleeping until we see a request.
rad_recv: Access-Request packet from host 127.0.0.1:1025, id=32,
length=134
        CHAP-Challenge =
"\035h\210\342\321\343\000vdu\331\336d]\322\2278\350"
        CHAP-Password = 0x0184381770d4852e0f8e034b22a10b66b1
        User-Name = "[EMAIL PROTECTED]"
        NAS-IP-Address = 208.244.163.28
        NAS-Identifier = "homenode.greatlakes.net"
        Service-Type = Framed-User
        Framed-Protocol = PPP
modcall: entering group authorize
  modcall[authorize]: module "preprocess" returns ok
radius_xlat:  '/bin/add-temp-state.sh'
Exec-Program: /bin/add-temp-state.sh
  modcall[authorize]: module "add-temp-state" returns ok
    rlm_realm: Looking up realm "homenode.greatlakes.net" for User-Name
= "[EMAIL PROTECTED]"
    rlm_realm: No such realm "homenode.greatlakes.net"
  modcall[authorize]: module "firstsuffix" returns noop
    users: Matched DEFAULT at 171
    users: Matched DEFAULT at 184
  modcall[authorize]: module "files" returns ok
modcall: group authorize returns ok
auth: No authenticate method (Auth-Type) configuration found for the
request: Rejecting the user
auth: Failed to validate the user.
Delaying request 2 for 1 seconds
Finished request 2
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 32 to 127.0.0.1:1025
Waking up in 4 seconds...
rad_recv: Access-Request packet from host 127.0.0.1:1025, id=32,
length=134
Sending duplicate reply to client localhost:1025 - ID: 32
Re-sending Access-Reject of id 32 to 127.0.0.1:1025
rl_next:  returning NULL
Waking up in 4 seconds...
rad_recv: Access-Request packet from host 127.0.0.1:1025, id=32,
length=134
Sending duplicate reply to client localhost:1025 - ID: 32
Re-sending Access-Reject of id 32 to 127.0.0.1:1025
rl_next:  returning NULL
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 2 ID 32 with timestamp 3fcc996e
Nothing to do.  Sleeping until we see a request.


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Reply via email to