Jacob Jarick wrote: > My problem is the ldap password retrieved from the windows client is > not being sent to the ldap server.
The problem is that you have configured "Auth-Type := LDAP", and then sent the server an 802.1x authentication request. Do NOT set Auth-Type = LDAP. This is repeated all over the place in the configuration files, the documentation, and on this list. In fact, just delete "ldap" from the "authenticate" section. If you can get PAP working with that setup, then 802.1x && EAP should work, too. Make sure that FreeRADIUS is retrieving the password from LDAP. If you have FreeRADIUS doing "bind as user" to LDAP, then it is NOT retrieving the password from LDAP. See: http://deployingradius.com/documents/protocols/ And the two other web pages linked to from that page. > The weird thing is It was working fine friday. Because you were doing PAP authentication. I'm half inclined to remove "ldap bind as user" from the server entirely. It confuses too many people, and causes too many problems. Alan DeKok. -- http://deployingradius.com - The web site of the book http://deployingradius.com/blog/ - The blog - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html